Re: Raw Logical Partition on AIX for OCR
- From: Sanjay Mishra <smishra_97@xxxxxxxxx>
- To: amit bansal <amit.bansal82@xxxxxxxxx>
- Date: Mon, 25 Jan 2010 06:27:06 -0800 (PST)
Thanks Amit. The link says that we can create the Logical Volume but as per
Oracle Metalink doc 293819.1
AIX –
Prior to installing Oracle CRS, the raw devices that will house the OCR and
voting disk files, must be defined and initialized using the following
procedure. Note this procedure uses raw partitions for these files and not
shared-concurrent logical volumes. The latter requires HACMP.
IS that mean that we cannot use the Raw Logical Volume with OCR/Voting without
HACMP
Sanjay
________________________________
From: amit bansal <amit.bansal82@xxxxxxxxx>
To: smishra_97@xxxxxxxxx
Cc: LS Cheng <exriscer@xxxxxxxxx>; oracle-l@xxxxxxxxxxxxx
Sent: Fri, January 22, 2010 8:44:03 PM
Subject: Re: Raw Logical Partition on AIX for OCR
Sanjay,
I have configured 10gR2 RAC on AIX and our SA was able to provide us 1 GB
volumes for OCR and Voting disk. Oracle Clusterware installation docs for AIX
lists down steps to create a volume group and the raw volumes inside it. Refer
to following
http://download.oracle.com/docs/cd/B19306_01/install.102/b14201/storage.htm#sthref539
Regards
Amit
http://askdba.org/weblog/
On Sat, Jan 23, 2010 at 6:01 AM, Sanjay Mishra <smishra_97@xxxxxxxxx> wrote:
Does anybody experience that if I need to create the Partition for OCR/Voting
on AIX, it has to be part of Volume group and if the disk is part of Volume
group which can be one disk in Volume Group then its PVID can;t be none and
thus violates the RAC requirement to have PVID to be none. I know Solaris is
not an issue where we have to do a partition so as leave the block 0 to avoid
loss of the device at reboot and used the new partitioned slice but Never check
it in AIX.
>
>SA menitoned that it is not possible and so we need to go with all 50G Luns
>each for OCR/Voting which will be not wastage of 250G space but also can
>impact IO/backup.
>
>Any AIX environment which has experience the same.
>
>Sanjay
>
>
>
________________________________
From: Sanjay Mishra <smishra_97@xxxxxxxxx>
>To: LS Cheng <exriscer@xxxxxxxxx>
>
>Cc: oracle-l@xxxxxxxxxxxxx
>Sent: Thu, January 21, 2010 5:50:44 PM
>
>Subject: Re: Raw Logical Partition on AIX for OCR
>
>
>
>Cheng
>
>So can it be used for OCR/Voting.
>Can I have multiple Partition like if I have 3 Physical Luns, then I can have
>1OCR and 1Voting from one LUN and same from second and 1 voting from Third.
>or
>I need to have 5 Physical Lun and create one partition from each and leave
>rest of the space intact
>
>TIA
>Sanjay
>
>
>
>
________________________________
From: LS Cheng <exriscer@xxxxxxxxx>
>To: smishra_97@xxxxxxxxx
>Cc: oracle-l@xxxxxxxxxxxxx
>Sent: Thu, January 21, 2010 5:45:53 PM
>Subject: Re: Raw Logical Partition on AIX for OCR
>
>You can use AIX's LVM to create smaller partitions
>
>
>Thanks
>
>--
>LSC
>
>
>
>On Thu, Jan 21, 2010 at 10:38 PM, Sanjay Mishra <smishra_97@xxxxxxxxx> wrote:
>
>I had to build a 10g RAC where I got 50G OCR/Voting Disk Physical Luns from
>SAN team with the note that they cannot carved anything less than that in SAN.
>Is it possible that I can create 1G Partition from each of them and use them
>so that I can back them easily especially Voting Disk or so. Environment is
>AIX. If anybody can share the experience. Using Physical LUN as it is not an
>issue. It is EMC storage.
>>
>>TIA
>>Sanjay
>>
>
>
>
Other related posts:
