RE: RAC Infiniband Questions

You use the bonding driver - just like you do for Ethernet, iirc.
What problem are you experiencing?  What do your ifcfg- files look like?

 

Matt

 

________________________________

From: oracle-l-bounce@xxxxxxxxxxxxx
[mailto:oracle-l-bounce@xxxxxxxxxxxxx] On Behalf Of Carlson,Todd
Sent: Tuesday, August 31, 2010 4:06 PM
To: oracle-l@xxxxxxxxxxxxx
Subject: RAC Infiniband Questions

 

Hey Guys,

 

We are building out our RAC environment on 11.2.0.1.2 with RHEL 5.5 on
Sun x4270 servers. We are running into problems trying to bind our
Infiniband connections together. In SAND & DEV, we have 2 node clusters.
Each node has 2 HCA's (Sun Dual Port 40Gb/sec 4x Infiniband QDR Host
Channel Adapter), 1 & 2 with 2 ports, A & B. We have 2 Sun 36 port
Infiniband switches. What we are trying to do is bind 1.A with 2.A and
bind 1.B with 2.B. However, there is very little documentation from
Sun/Oracle or RedHat on how to do this and all of our attempts have
failed. So, right now these environments are using one connection
between the nodes using UDP. 

 

We are currently building out TEST and we need to have this working by
the 10th of Sept. We will then rebuild DEV & SAND to have the binding
working correctly. So, I am hoping/praying that you can guide us here on
how we go about configuring the binding of the IB ports. Is there some
documentation that you would send me? We have read "RAC Support for RDS
Over Infiniband [ID 751343.1]" and are essentially stuck at step #2. 

 

On a Similar vein, once we get the channels bound, we would then have 2
private, bound interfaces to use. In the cluster install (step 6 of 16),
would we select both of them or just one?

 

Thanks for your help here, I really appreciate it!

 

Todd Carlson

Manager - DBA/ERP & EUC Teams

World Wide Technology

(314) 301-2788

 

Other related posts: