Procedure to DROP a 700 GB Table in 10gR2 ?
- From: "VIVEK_SHARMA" <VIVEK_SHARMA@xxxxxxxxxxx>
- To: <oracle-l@xxxxxxxxxxxxx>
- Date: Mon, 22 Jan 2007 23:47:42 +0530
Folks
In a 3 TB TEST Database in 10gR2, a 700 GB Table needs to be DROPPED.
This Table is present in a Unique Tablespace.
Which of the following Options is Most Advisable w.r.t. performance,
speed & ease of Drop:-
1) DROP the Respective Tablespace including contents
2) Truncate the Table -> Drop the Table
3) Drop the Table
4) Some Other Option?
Thanks indeed
**************** CAUTION - Disclaimer *****************
This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely
for the use of the addressee(s). If you are not the intended recipient, please
notify the sender by e-mail and delete the original message. Further, you are
not to copy, disclose, or distribute this e-mail or its contents to any other
person and any such actions are unlawful. This e-mail may contain viruses.
Infosys has taken every reasonable precaution to minimize this risk, but is not
liable for any damage you may sustain as a result of any virus in this e-mail.
You should carry out your own virus checks before opening the e-mail or
attachment. Infosys reserves the right to monitor and review the content of all
messages sent to or from this e-mail address. Messages sent to or from this
e-mail address may be stored on the Infosys e-mail system.
***INFOSYS******** End of Disclaimer ********INFOSYS***
Other related posts:
