RE: Apps Advanced installation
- From: "Rolfe, Kent \(GTI AIS OPS/SE\)" <kent_rolfe@xxxxxx>
- To: <ora-apps-dba@xxxxxxxxxxxxx>
- Date: Mon, 19 Jun 2006 09:10:42 +0100
(1) Apply pre-req patches ( see note I pointed out )
(2) clone your current web node onto another node.
(3) set up the balancer hardware + open the ports etc and list the two
web nodes in its hosts table.
(4) set the name of your load balancer in dns etc to say 'myweblb01' (
my web load balancer 01 )
(5) Change the context file on each node .. web entry points etc .. see
note pointed out below to point to myweblb01
(6) Run autoconfig
(7) ... fix any issues htat may come up .... ( like the potential for
reverse name lookup errors in your logs - which will happen if you use
virtual node names instead of physical ones ) etc.
If you need ton know more on how to set up the lb hardware itself, then
that will be hardware specific. I.e. are you using BIG IP, load director
etc etc
-----Original Message-----
From: ora-apps-dba-bounce@xxxxxxxxxxxxx
[mailto:ora-apps-dba-bounce@xxxxxxxxxxxxx] On Behalf Of Fadi Hasweh
Sent: 19 June 2006 09:02
To: ora-apps-dba@xxxxxxxxxxxxx
Subject: RE: Apps Advanced installation
Thanks kent for prompt reply I will check and get back to you.
I have hardware load balancer already but I don't know how to do more
than one web node installation
Thanks again
Any hint on how to do the installation will be helpful.
fadi
_____
From: ora-apps-dba-bounce@xxxxxxxxxxxxx
[mailto:ora-apps-dba-bounce@xxxxxxxxxxxxx] On Behalf Of Rolfe, Kent (GTI
AIS OPS/SE)
Sent: Monday, June 19, 2006 10:57 AM
To: ora-apps-dba@xxxxxxxxxxxxx
Subject: RE: Apps Advanced installation
Yes - its standard practice in every place I have worked ( where I am
currently has 4 web front ends ). But, whilst Apps can balance itself,
you are much better off with a hardware load balancer to do the work for
you.
If you are doing this on a company scale ( i.e. not just testing
yourself ) then I would definitely say to get a hardware ( as opposed to
software ) load balancer. If you are testing for yourself, you have two
options .. (1) Download a free software load balancer from the net (
there will be a few around ) or (2) start trying to do the 'apps
version' which, well, is not fully balanced and is flawed in a few
respects.
If you are running SSL, then I would get a hardware load balancer that
includes an SSL accelerator. Because, otherwise you start getting issues
with your balancing due to the inability of the balancer to interpret
the packets ... i..e it then needs to keep the stickiness based on the
IP that originated the request. Also, the SSL accelerator will offload
the CPU overhead onto the accelerator from the web nodes.
Assuming you are not going for the Apps version ( I dont know anyone who
uses that ) - its just a matter of either (a) changing your context file
and running autoconfig on each web node or (b) Changing a few profiles
and the Apache config files. Basically, you would have each node being
say web1 and web2 and you would have your balancer to be called 'web'.
Then, your profiles point to 'web' instead of web or web2. You then may
want to, on each of web1 and web2, put and entry in the hosts file for
itself to point to web. That allows reverse name lookups and internal
name resolution ( like workflow formatted emails ) to be quicker.
There must be something on metalink somewhere.... in fact just looked
this up .. start with reading 217368.1
BTW - I would not look at Jserv load balancing. I spent some time
playing with that and, unless you are looking at using cheap linux
boxes, I did not find any great reason to go for that.
Kent.
-----Original Message-----
From: ora-apps-dba-bounce@xxxxxxxxxxxxx
[mailto:ora-apps-dba-bounce@xxxxxxxxxxxxx] On Behalf Of Fadi Hasweh
Sent: 19 June 2006 08:10
To: ora-apps-dba@xxxxxxxxxxxxx
Subject: Apps Advanced installation
Dear all,
Is there a way to have more than one web(HTTP) node and to enable load
balancing between them.
Thanks
Fadi
"This email is intended for the above named adressee (s) only and may
contain confidential and/or privilege information and should not be used
by anyone who is not the original intended recipient(s). Any review,
print, copy, reliance or distribution by others or forwarding without
express permission is strictly prohibited If you have received this
email in error, kindly notify the sender immediately by reply email and
delete this email and any attachments from your mailbox or any other
storage mechanism. Thank you.
Email transmission cannot be guaranteed to be secured or error free, as
information could be intercepted, corrupted, lost, destroyed, received
late or incomplete, or could contain viruses. The sender therefore does
not accept liability for any error or omission in the contents of this
message, which arises as a result of email transmission. Opinions,
conclusions and other information in this message that do not relate to
the official business of Umniah Mobile Company and is not its
responsibility shall be understood as neither given nor endorsed by the
organization."
_____
If you are not an intended recipient of this e-mail, please notify the
sender, delete it and do not read, act upon, print, disclose, copy,
retain or redistribute it. Click here <http://www.ml.com/email_terms/>
for important additional terms relating to this e-mail.
http://www.ml.com/email_terms/
_____
"This email is intended for the above named adressee (s) only and may
contain confidential and/or privilege information and should not be used
by anyone who is not the original intended recipient(s). Any review,
print, copy, reliance or distribution by others or forwarding without
express permission is strictly prohibited If you have received this
email in error, kindly notify the sender immediately by reply email and
delete this email and any attachments from your mailbox or any other
storage mechanism. Thank you.
Email transmission cannot be guaranteed to be secured or error free, as
information could be intercepted, corrupted, lost, destroyed, received
late or incomplete, or could contain viruses. The sender therefore does
not accept liability for any error or omission in the contents of this
message, which arises as a result of email transmission. Opinions,
conclusions and other information in this message that do not relate to
the official business of Umniah Mobile Company and is not its
responsibility shall be understood as neither given nor endorsed by the
organization."
Other related posts:
