[modeleng] Re: Taper-turning Attachment

Hey, Hubert!  Could you post some photos on Alan's or
TEL's sites?  Congratulations on the accomplishment!

Al
--- Shep <shep.28@xxxxxxxxxxxx> wrote:

> Hi Everyone
> I have just completed bodging up the South Bend T-T
> Attachment to fit my Hardinge.   It works a treat!  
>  I was able to fit it without altering the
> Attachment or the Hardinge, and it is permanently
> attached to the back of the bed.   Inserting one
> bolt activates the Attachment, but without this
> bolt, it does not interfere with the normal lathe
> operation.
> 
> As it cost me 10 per cent of a second-hand Harding
> part, I am very chuffed!
> 
> Cheers!   Hubert
> MODEL ENGINEERING DISCUSSION LIST.
> 
> To UNSUBSCRIBE from this list, send a blank email
> to, 
> modeleng-request@xxxxxxxxxxxxx with the word
> "unsubscribe" in the subject line.
> 



      
____________________________________________________________________________________
Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile.  Try it now.  
http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
MODEL ENGINEERING DISCUSSION LIST.

To UNSUBSCRIBE from this list, send a blank email to, 
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.

Other related posts: