[modeleng] Re: Super Adpet Lathes
- From: "TEL" <tel@xxxxxxxxxxx>
- To: <modeleng@xxxxxxxxxxxxx>
- Date: Fri, 20 Apr 2007 20:05:38 +1000
the 3/8" BSF is (I think) 20 tpi x 55° thread from
> Hello again Tel,
>
> No this is for the little Super Adept lathe that I had given a while back,
> not the Myford. This one could be either a BSF or a Whitworth or even a
BA,
> but is about 1/4" - 3/8" diameter.
>
> See you this evening on Messenger, hopefully.
>
> Tony.
>
>
> ----- Original Message -----
> From: "TEL" <tel@xxxxxxxxxxx>
> To: <modeleng@xxxxxxxxxxxxx>
> Sent: Friday, April 20, 2007 10:36 AM
> Subject: [modeleng] Re: Super Adpet Lathes
>
>
> > On your Myford Tony? ... 1 1/8" x 12c tpi - RDG do a veryt reasonably
> > priced
> > set of taps dor 'em.
> > ----- Original Message -----
> > From: "Tony Wells" <oaksfield@xxxxxxxxxxxxxxx>
> > To: <modeleng@xxxxxxxxxxxxx>
> > Sent: Friday, April 20, 2007 7:14 PM
> > Subject: [modeleng] Super Adpet Lathes
> >
> >
> >> Some help please - can anyone help me identify the headstock spindle
> > thread size? I only have metric and UNF thread gauges, and it doesn't
look
> > like either of those.
> >> Thank you,
> >>
> >> Tony Wells.
>
>
> MODEL ENGINEERING DISCUSSION LIST.
>
> To UNSUBSCRIBE from this list, send a blank email to,
> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject
line.
>
MODEL ENGINEERING DISCUSSION LIST.
To UNSUBSCRIBE from this list, send a blank email to,
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.
Other related posts:
