OK, the Super Adept has a 3/8 BSF thread on the spindle nose > Hello again Tel, > > No this is for the little Super Adept lathe that I had given a while back, > not the Myford. This one could be either a BSF or a Whitworth or even a BA, > but is about 1/4" - 3/8" diameter. > > See you this evening on Messenger, hopefully. > > Tony. > > > ----- Original Message ----- > From: "TEL" <tel@xxxxxxxxxxx> > To: <modeleng@xxxxxxxxxxxxx> > Sent: Friday, April 20, 2007 10:36 AM > Subject: [modeleng] Re: Super Adpet Lathes > > > > On your Myford Tony? ... 1 1/8" x 12c tpi - RDG do a veryt reasonably > > priced > > set of taps dor 'em. > > ----- Original Message ----- > > From: "Tony Wells" <oaksfield@xxxxxxxxxxxxxxx> > > To: <modeleng@xxxxxxxxxxxxx> > > Sent: Friday, April 20, 2007 7:14 PM > > Subject: [modeleng] Super Adpet Lathes > > > > > >> Some help please - can anyone help me identify the headstock spindle > > thread size? I only have metric and UNF thread gauges, and it doesn't look > > like either of those. > >> Thank you, > >> > >> Tony Wells. > > > MODEL ENGINEERING DISCUSSION LIST. > > To UNSUBSCRIBE from this list, send a blank email to, > modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line. > MODEL ENGINEERING DISCUSSION LIST. To UNSUBSCRIBE from this list, send a blank email to, modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.