[modeleng] Re: Pressure gauges.
- From: PSBR <psbr20252@xxxxxxxxxxxxxxxx>
- To: modeleng@xxxxxxxxxxxxx
- Date: Wed, 09 Jul 2014 21:31:54 +0100
Alan,
If you've not sold out, may I have one please.
It can join the racks of the "bound to come in useful one day" items!
Cheers
Peter
On 2014-07-09 17:22, stepney wrote:
> I have several (7 or 8) NEW and unused 2_3/8" (60mm) diam pressure
> gauges, marked 0 to 160psi, plus 0 to 11 bar.
> These were for a project that never happened and are now surplus to my
> requirements.
>
> The entry is 1//4" BSP at the bottom.
>
> £5 each, or make an offer if you want several.
>
> They would be ideal for pressure testing (if you only run at 80psi, and
> want to test at 2x WP) or 100psi if you test at 1.5xWP.
>
> Alan
>
> MODEL ENGINEERING DISCUSSION LIST.
>
> To UNSUBSCRIBE from this list, send a blank email to,
> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject
> line.
MODEL ENGINEERING DISCUSSION LIST.
To UNSUBSCRIBE from this list, send a blank email to,
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.
Other related posts: