Congratulations on what you have accomplished and good luck on the accessories. Al Messer --- On Mon, 12/8/08, Shep <shep.28@xxxxxxxxxxxx> wrote: > From: Shep <shep.28@xxxxxxxxxxxx> > Subject: [modeleng] Little lathe complete > To: "Modeleng" <modeleng@xxxxxxxxxxxxx> > Date: Monday, December 8, 2008, 6:51 AM > Hello everyone > This is a red-letter day - after many false starts, and > several years of playing in the workshop, I have completed > the little lathe that I have been making from scratch. > > I wish to thank you all for your encouragement and for your > suggestions - particularly over the possible methods of > producing the change-wheel cover. After considering all of > the suggestions, I made a cardboard model of the cover and > took it to a friendly sheet-metal-basher who followed my > cardboard template and created it from sheet steel, at a > very moderate cost. > > This has been a happy project for an old codger, and has > produced a little screwcutting lathe, which works very well > indeed. I have learned a lot in the process! > > For anyone wishing to make a similar lathe, I have one word > of advice - this is NOT a cheap option - the materials and > accessories (chucks etc) cost a lot more than buying a > Chinese lathe! > > If anyone wishes to see a couple of pictures, please > contact me on shep.28@xxxxxxxxxxxx > > I will spend the next year making a series of accessories > for the little beast. > > Cheers! Hubert > MODEL ENGINEERING DISCUSSION LIST. > > To UNSUBSCRIBE from this list, send a blank email to, > modeleng-request@xxxxxxxxxxxxx with the word > "unsubscribe" in the subject line. MODEL ENGINEERING DISCUSSION LIST. To UNSUBSCRIBE from this list, send a blank email to, modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.