[modeleng] Re: Harrogate ME Exhibition

  • From: "Andrew Houston" <andrew@xxxxxxxxxxxxxxxxx>
  • To: <modeleng@xxxxxxxxxxxxx>
  • Date: Mon, 21 Apr 2008 16:16:49 +0100

Ok.

So a US gallon equivalent in UK still cost 4/5 x $9.50 = $7.60 - which don't
compare with the price in USA which is, relatively, "cheap as chips".

Andy 

-----Original Message-----
From: modeleng-bounce@xxxxxxxxxxxxx [mailto:modeleng-bounce@xxxxxxxxxxxxx]
On Behalf Of Chris Crosskey
Sent: 21 April 2008 16:05
To: modeleng@xxxxxxxxxxxxx
Subject: [modeleng] Re: Harrogate ME Exhibition

Remember our gallon is bigger than there, a proper gallon of water
weighs ten pounds, theirs weighs 8lb, it's down to them having 16oz
pints and us having a proper 20 ounce pint....

chrisc
> -----Original Message-----
> From: modeleng-bounce@xxxxxxxxxxxxx
[mailto:modeleng-bounce@xxxxxxxxxxxxx]
> On Behalf Of Clif Walker
> Sent: 21 April 2008 10:00
> To: modeleng@xxxxxxxxxxxxx
> Subject: [modeleng] Harrogate ME Exhibition
> 
> Hi All,
> I'm getting ready for the annual trip to the Harrogate ME exhibition.
Only
> about 500 miles each way which at the current petrol prices is
becoming
> expensive.
> For our American members over here it now works out about $9.5 a
gallon.
> 
> Regards
> 
> Clif
> MODEL ENGINEERING DISCUSSION LIST.
> 
> To UNSUBSCRIBE from this list, send a blank email to,
> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the
subject
> line.

________________________________________________________________________
This e-mail, and any attachment, is confidential. If you have received it in
error, do not use or disclose the information in any way, notify me
immediately, and please delete it from your system.
________________________________________________________________________
MODEL ENGINEERING DISCUSSION LIST.

To UNSUBSCRIBE from this list, send a blank email to, 
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject
line.

MODEL ENGINEERING DISCUSSION LIST.

To UNSUBSCRIBE from this list, send a blank email to, 
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.

Other related posts: