[modeleng] Re: Fw: Scary Flying...........
- From: "Barrie Purslow" <bpduo@xxxxxxxxxxxxx>
- To: <modeleng@xxxxxxxxxxxxx>
- Date: Fri, 21 Nov 2008 18:56:43 -0000
Clif,
If you go to
http://www.reggiepaulk.com/2008/10/killathrill-generates-huge-buzz-with.html
and click on the fourth graphic down various errors in the original vid.
will be revealed. So, it's a fake albeit a very good one.
Barrie
----- Original Message -----
From: "Clif Walker" <clif.gwr@xxxxxxxxxxxx>
To: <modeleng@xxxxxxxxxxxxx>
Sent: Friday, November 21, 2008 5:27 PM
Subject: [modeleng] Re: Fw: Scary Flying...........
> Hi All,
>
> If it was a model it convinced me.
>
> Regards
>
> Clif
> ----- Original Message -----
> From: "Jesse Livingston" <fernj1@xxxxxxxxxxx>
> To: <modeleng@xxxxxxxxxxxxx>
> Sent: Friday, November 21, 2008 2:15 PM
> Subject: [modeleng] Re: Fw: Scary Flying...........
>
>
>> Clif et al,
>>
>> That was some good flying, but it was actually a model airplane according
>> to
>> a bunch of people. At some time after the plane landed, a real plane was
>> substituted so the pilot could climb out. Inconsistencies in the paint
>> scheme and profile of the nose were pointed out as well as the obvious
>> sound
>> of a typical two stroke model air plane engine and the fact that there
>> are
>> no cables etc to the aerilons. Irregardless, whoever landed the plane,
>> be
>> it model or real was good.
>>
>> Jesse in cold Troy, TN
>>
>> Hi All ,
>>
>> Whoops, sorry I forgot that our site cannot take video links.
>> The site to see the video is the best ever wmv
>>
>>
>> Regards
>>
>> Clif
>>
>> MODEL ENGINEERING DISCUSSION LIST.
>>
>> To UNSUBSCRIBE from this list, send a blank email to,
>> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject
>> line.
>
>
> --------------------------------------------------------------------------------
>
>
>
> No virus found in this incoming message.
> Checked by AVG - http://www.avg.com
> Version: 8.0.175 / Virus Database: 270.9.7/1799 - Release Date: 19/11/2008
> 08:58
>
> MODEL ENGINEERING DISCUSSION LIST.
>
> To UNSUBSCRIBE from this list, send a blank email to,
> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject
> line.
>
MODEL ENGINEERING DISCUSSION LIST.
To UNSUBSCRIBE from this list, send a blank email to,
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.
Other related posts:
