Hi. Here are some additional suggestions. The selected part and multipart buttons cycle through states when you press them. However, holding down either of them returns it to the first state. Holding down selected part resets it to tone 1, and holding down multipart resets to reverb. Holding down the master effect button brings up the settings for the master effect. Pressing both of the octave buttons at the same time centers the keyboard. There are additional shortcuts and combinations, but they don't work everywhere. For example, holding down the top and the rewind buttons jumps to locate point 1, and holding down the top and forward buttons jumps to locate point 2. This only works in the sequencer modes, though. Using Store with the rewind and forward keys sets the locate points. SF6 works in many places for setting a value. For example, in places where you need to set a key value, such as a range, you can arrow to the parameter, hold down SF6, and press a key on the keyboard. In other places, pressing SF6 enters a mode where you can type in numeric values by using the SF1-SF6 and F1-F6 keys. Bryan ________________________________ From: moaccess-bounce@xxxxxxxxxxxxx [mailto:moaccess-bounce@xxxxxxxxxxxxx] On Behalf Of Jes Sent: Friday, October 26, 2007 11:28 AM To: MoAccess@xxxxxxxxxxxxx Subject: [MoAccess] Xs layout list Hello folks. Let me know your feedback on this thing. It's just in straight text right now. Hopefully Bryan, you can format it nicely into an html document. Jes