Re: [MoAccess] Sonar
- From: "Clarence Griffin" <goldfingas@xxxxxxx>
- To: <MoAccess@xxxxxxxxxxxxx>
- Date: Mon, 21 Jan 2008 10:34:21 -0500
Your first question can be answered easily on this list.
1. go to song or pattern mode.
2. press the sequencer setup button, its to the right of pattern.
3. press f3.
4. spin the dial to the left, then press inc 2 times.
5. press enter.
This turns local off. To turn it back on, follow steps 1 threw 4 then turn
the dial back to the left and press enter to put your motif xs back on local
mode for normal play.
Hope that helps.
GF
http://www.goldfingas.com
Check out the block party every Thursday on The Beyond Radio Network
http://www.tbrn.net
for winamp ogg stream:
http://tbrn.net:8888/tbrn.ogg
-----Original Message-----
From: moaccess-bounce@xxxxxxxxxxxxx [mailto:moaccess-bounce@xxxxxxxxxxxxx]
On Behalf Of Benjamin Blatter
Sent: Monday, January 21, 2008 10:24 AM
To: MoAccess@xxxxxxxxxxxxx
Subject: [MoAccess] Sonar
Hi to all!
1. Can I configure Sonar or the Motif XS, that I hear only the MIDI-Channel
which is selected for recording?
It sounds par example a little bit disgusting when I record drums and hear
other instruments the same time playing *g*
2. Is there a short key to open the property of a Channel? Until now I place
the Jaws Cursor on the track, make a right click and move to Track
Properties.
3. And is there a way to see or hear if a Track is armed for recording? Of
course I can watch it in the Menu. But maybe there's an other way.
I Use Sonar 7 Pro and JSonar.
Thanks for your help!
Benjamin
For links to all Motif info for blind owners, visit www.MoAccess.info.
To change your list options and view archives for the MoAccess list, visit
www.freelists.org/list/moaccess.
For links to all Motif info for blind owners, visit www.MoAccess.info.
To change your list options and view archives for the MoAccess list, visit
www.freelists.org/list/moaccess.
Other related posts:
