Re: [MoAccess] Sampling on the ES
- From: "Elexis Gillette" <lex@xxxxxxxxxxxxxxxx>
- To: <MoAccess@xxxxxxxxxxxxx>
- Date: Wed, 30 Jan 2008 11:07:42 -0500
Okay, I looked again but can't seem to find anything that can resolve my
problem. Any more suggestions? I may be out of luck, lol.
________________________________
From: moaccess-bounce@xxxxxxxxxxxxx
[mailto:moaccess-bounce@xxxxxxxxxxxxx] On Behalf Of Clarence Griffin
Sent: Wednesday, January 30, 2008 11:05 AM
To: MoAccess@xxxxxxxxxxxxx
Subject: Re: [MoAccess] Sampling on the ES
np
GF
http://www.goldfingas.com <http://www.goldfingas.com/>
Check out the block party every Thursday on The Beyond Radio Network
http://www.tbrn.net <http://www.tbrn.net/>
for winamp ogg stream:
http://tbrn.net:8888/tbrn.ogg
________________________________
From: moaccess-bounce@xxxxxxxxxxxxx
[mailto:moaccess-bounce@xxxxxxxxxxxxx] On Behalf Of Elexis Gillette
Sent: Wednesday, January 30, 2008 10:05 AM
To: MoAccess@xxxxxxxxxxxxx
Subject: Re: [MoAccess] Sampling on the ES
Yes, I looked but I'm going to check again to see if I can find
something. Thanks
________________________________
From: moaccess-bounce@xxxxxxxxxxxxx
[mailto:moaccess-bounce@xxxxxxxxxxxxx] On Behalf Of Clarence Griffin
Sent: Wednesday, January 30, 2008 10:02 AM
To: MoAccess@xxxxxxxxxxxxx
Subject: Re: [MoAccess] Sampling on the ES
did you check the utility f2 settings?
Check the reference guide for exactly where it is. I no longer have an
ES so I kind of forgot. lol
Hope that helps though. There are 2 settings, one for line level stuff,
and one for mic.
That should get you where you need to be.
GF
http://www.goldfingas.com <http://www.goldfingas.com/>
Check out the block party every Thursday on The Beyond Radio Network
http://www.tbrn.net <http://www.tbrn.net/>
for winamp ogg stream:
http://tbrn.net:8888/tbrn.ogg
________________________________
From: moaccess-bounce@xxxxxxxxxxxxx
[mailto:moaccess-bounce@xxxxxxxxxxxxx] On Behalf Of Elexis Gillette
Sent: Wednesday, January 30, 2008 12:08 AM
To: MoAccess@xxxxxxxxxxxxx
Subject: [MoAccess] Sampling on the ES
Hey guys
I am trying to record some vocals on my motif ES. Everything is working
okay but when the vocals are recorded, they are really low in volume
compared to the beat. I go to the pattern edit screen and turn up the
midi event once it is recorded and I also use the slider to turn up the
volume but it still is considerably low when compared to the music.
Does anyone know what could be causing this issue? Is there something
else I should do? I also have the preamp knob turned to the highest
point and I still get these results. Any help is appreciated, thanks a
lot.
Other related posts:
