Sat, 13 Sep 2003 01:02:39 -0700 (PDT) scripsit Meph Istopheles: > I don't know what's wrong -- I don't even know where to add > > Option "ZAxisMapping" "4 5" Here: > Section "InputDevice" > Identifier "Mouse0" > Driver "mouse" > Option "Protocol" "auto" > Option "Device" "/dev/mouse" Option "ZAxisMapping" "4 5" > EndSection You might want to change the protocol: Option "Protocol" "IMPS/2" You might be able to accelerate things by adding HW acceleration: In the Section "Module" part: Load "glx" Load "dri" In the same section, make sure TTF fonts are switched on: Load "freetype" Below the Section "Modules", add this: Section "DRI" Mode 0666 EndSection FWIW, here's my entire /etc/X11/XF86Config file missing the mile long comments in parts and sections entirely commented out: # ********************************************************************** # Module section -- this section is used to specify # which dynamically loadable modules to load. # ********************************************************************** # Section "Module" # This loads the DBE extension module. Load "dbe" # Double buffer extension # This loads the miscellaneous extensions module, and disables # initialisation of the XFree86-DGA extension within that module. SubSection "extmod" Option "omit xfree86-dga" # don't initialise the DGA extension EndSubSection # This loads the Type1 and FreeType font modules Load "type1" Load "freetype" # This loads the GLX module Load "glx" Load "dri" EndSection Section "DRI" Mode 0666 EndSection # ********************************************************************** # Files section. This allows default font and rgb paths to be set # ********************************************************************** Section "Files" # The location of the RGB database. Note, this is the name of the # file minus the extension (like ".txt" or ".db"). There is normally # no need to change the default. RgbPath "/usr/X11R6/lib/X11/rgb" # Multiple FontPath entries are allowed (which are concatenated together), # as well as specifying multiple comma-separated entries in one FontPath # command (or a combination of both methods) # # If you don't have a floating point coprocessor and emacs, Mosaic or other # programs take long to start up, try moving the Type1 and Speedo directory # to the end of this list (or comment them out). # FontPath "/usr/X11R6/lib/X11/fonts/local/" FontPath "/usr/X11R6/lib/X11/fonts/misc/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/Type1/" # FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" FontPath "/usr/X11R6/lib/X11/fonts/ttf/" FontPath "/usr/X11R6/lib/X11/fonts/3003fonts/" # The module search path. The default path is shown here. # ModulePath "/usr/X11R6/lib/modules" EndSection # ********************************************************************** # Server flags section. # ********************************************************************** Section "ServerFlags" # nothing but comments EndSection # ********************************************************************** # Input devices # ********************************************************************** # ********************************************************************** # Core keyboard's InputDevice section # ********************************************************************** Section "InputDevice" Identifier "Keyboard1" Driver "Keyboard" # For most OSs the protocol can be omitted (it defaults to "Standard"). # When using XQUEUE (only for SVR3 and SVR4, but not Solaris), # uncomment the following line. # Option "Protocol" "Xqueue" Option "AutoRepeat" "250 30" Option "XkbRules" "xfree86" Option "XkbModel" "pc105" Option "XkbLayout" "fr" EndSection # ********************************************************************** # Core Pointer's InputDevice section # ********************************************************************** Section "InputDevice" # Identifier and driver Identifier "Mouse1" Driver "mouse" Option "Protocol" "IMPS/2" Option "Device" "/dev/mouse" Option "ZAxisMapping" "4 5" EndSection # ********************************************************************** # Other input device sections # this is optional and is required only if you # are using extended input devices. This is for example only. Refer # to the XF86Config man page for a description of the options. # ********************************************************************** # # nothing but comments # ********************************************************************** # Monitor section # ********************************************************************** # Any number of monitor sections may be present Section "Monitor" Identifier "Kenitec monitor" HorizSync 31.5 - 48.5 VertRefresh 50-70 DisplaySize 276 207 EndSection # ********************************************************************** # Graphics device section # ********************************************************************** # Any number of graphics device sections may be present # Standard VGA Device: Section "Device" Identifier "Standard VGA" VendorName "Unknown" BoardName "Unknown" Driver "vga" EndSection # Device configured by xf86config: Section "Device" Identifier "ATI Rage 128" Driver "ati" Option "AGPMode" "2" VideoRam 32768 # Insert Clocks lines here if appropriate EndSection # ********************************************************************** # Screen sections # ********************************************************************** # Any number of screen sections may be present. Each describes # the configuration of a single screen. A single specific screen section # may be specified from the X server command line with the "-screen" # option. Section "Screen" Identifier "Screen 1" Device "ATI Rage 128" Monitor "Kenitec monitor" DefaultDepth 24 Subsection "Display" Depth 8 Modes ViewPort 0 0 EndSubsection Subsection "Display" Depth 16 Modes ViewPort 0 0 EndSubsection Subsection "Display" Depth 24 Modes "1024x768" "800x600" ViewPort 0 0 EndSubsection Subsection "Display" Depth 32 Modes "1024x768" "800x600" ViewPort 0 0 EndSubsection EndSection # ********************************************************************** # ServerLayout sections. # ********************************************************************** Section "ServerLayout" Identifier "Simple Layout" Screen "Screen 1" InputDevice "Mouse1" "CorePointer" InputDevice "Keyboard1" "CoreKeyboard" EndSection -- G. Stewart -- gstewart@xxxxxxxxxxx -- gstewart@xxxxxxxxxxx Registered Linux user #284683 (Slackware 9.0) --------------------------------------------------------------- FAILURE IS NOT AN OPTION. It comes bundled with Microsoft software. To unsubcribe send e-mail with the word unsubscribe in the body to: Linux-Anyway-Request@xxxxxxxxxxxxx?body=unsubscribe