[Linux-Anyway] CDRW...again
- From: Meph Istopheles <Meph@xxxxxxxxxxx>
- To: Linux Anyway <Linux-Anyway@xxxxxxxxxxxxx>
- Date: Sat, 13 Dec 2003 12:57:02 -0800 (PST)
Now I'm in slack, I thought I'd see about configureing my
burner. I think, like in RH, I've got it recognised as a cdrom
(only), but unlike RH, scanbus isn't reporting the chipset.
Naturally, when I attempt to burn something, I get an error
saying that hdc appears to only be a cdrom &, of course, won't
burn. So, as this is where I'd left off in RH, I'm just as lost
as then. Any suggestions would be nice.
Below is some pertinent infos:
#: cdrecord -scanbus
Cdrecord 2.00.3 (i686-pc-linux-gnu) Copyright (C) 1995-2002 J=F6rg
Schilling
Linux sg driver version: 3.1.25
Using libscg version 'schily-0.7'
scsibus0:
cdrecord: Warning: controller returns wrong size for CD
capabilities page.
0,0,0 0) 'E-IDE ' 'CD-ROM 56X L ' '22 '
Removable CD-ROM
0,1,0 1) *
0,2,0 2) *
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *
scsibus1:
1,0,0 100) 'FUJIFILM' 'USB-DRIVEUNIT ' '1.00'
Removable Disk
1,1,0 101) *
1,2,0 102) *
1,3,0 103) *
1,4,0 104) *
1,5,0 105) *
1,6,0 106) *
1,7,0 107) *
/proc/scsi/scsi:
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: E-IDE Model: CD-ROM 56X L Rev: 22
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 00 Lun: 00
Vendor: FUJIFILM Model: USB-DRIVEUNIT Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 02
dmesg [NOTE: Burner is usb, & FujiFilm is a digital camera]:
[...]
hdc: CD-ROM 56X L, ATAPI CD/DVD-ROM drive
[...]
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno
=3D 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno
=3D 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno
=3D 2
[...]
hdc: attached ide-scsi driver.
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: E-IDE Model: CD-ROM 56X L Rev: 22
Type: CD-ROM ANSI SCSI revision:
02
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 56x/56x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
[...]
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
uhci.c: USB Universal Host Controller Interface driver v1.1
[...]
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
[...]
hub.c: 2 ports detected
hub.c: new USB device 00:07.2-1, assigned address 2
usb.c: USB device 2 (vend/prod 0xac9/0x0) is not claimed by any
active driver.
hub.c: new USB device 00:07.2-2, assigned address 3
usb.c: USB device 3 (vend/prod 0x4cb/0x112) is not claimed by any
active driver.
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
scsi1 : SCSI emulation for USB Mass Storage devices
Vendor: FUJIFILM Model: USB-DRIVEUNIT Rev: 1.00
Type: Direct-Access ANSI SCSI revision:
02
Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0
SCSI device sda: 32000 512-byte hdwr sectors (16 MB)
sda: Write Protect is off
sda: sda1
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 3
USB Mass Storage support registered.
Anything else...?
Meph
--
Passionate hatred can give meaning and purpose to an empty
life.
-Eric Hoffer
To unsubcribe send e-mail with the word unsubscribe in the body to:
Linux-Anyway-Request@xxxxxxxxxxxxx?body=unsubscribe
Other related posts:
- » [Linux-Anyway] CDRW...again
