[karc] Re: Looking for....coil FOR VE3OL/VE3KGJ
- From: "Norm" <normh@xxxxxxxxxx>
- To: <karc@xxxxxxxxxxxxx>
- Date: Tue, 20 May 2008 07:53:06 -0400
I HAVE A COIL MEASURING 3-3/4" x 2". IT IS ON A CERAMIC FORM AND OF GOOD
QUALITY.
I WILL BE IN KINGSTON THIS AM AT HDH. COULD I LEAVE IT SOMEWHERE FOR YOU TO
PICK UP. I WONT HAVE MY RADIO WITH ME UNLESS A HANDHELD WORKS.
IF YOU TRY MY CELL PHONE I WILL HAVE IT ON WHILE IN TRANSIT BETWEEN 815 AND
10AM (approx). AND AGAIN AFTER TEN. 613-583-7699. OR GIVE ME A CALL
BEFORE 815AM AT 613-273-3896 WHICH IS NOT A TOLL CALL FROM KG
NORM ve3vy
----- Original Message -----
From: "Ron Walsh" <ve3go@xxxxxxxxxxxx>
To: <karc@xxxxxxxxxxxxx>
Sent: Sunday, May 18, 2008 7:26 PM
Subject: [karc] Re: Looking for....coil
> Have a 2 1/2" by 6" coil if it is of use!
>
>
> Jim VE7GOF says hello from Victoria.
>
> Had a great chat over the VE7VIC repeater whilein Victoria
>
> Ron, VE3GO
>
> Bill wrote:
> > I am looking for a (B&W type) coil about 4 inches long by 1 1/2" .
> > Neither dimension is critical. But any bigger and I will have to find
> > a new box....
> >
> > I want to make an induction box to extend the tuning range of my field
> > radio. I have the box. I have a 12 position switch (these are hard to
> > find but I have one in my junk box which I bought 30 years ago!).
> >
> > I am also looking for two BNC panel mounted connectors.... preferred
> > ones are those that have a threaded body rather than a flange that
> > accepts 4 screws.... I hope I haven't screwup the descriptions....
> >
> > What have you got in your juke box?
> >
> > Bill, VA3OL / VE3KGJ
> > Kingston, ON
> >
> > Please respond to VA3OL@xxxxxxxxx <mailto:VA3OL@xxxxxxxxx>
>
>
>
> --
> No virus found in this incoming message.
> Checked by AVG.
> Version: 7.5.524 / Virus Database: 269.23.21/1454 - Release Date:
5/19/2008 7:44 AM
>
>
Other related posts:
- » [karc] Re: Looking for....coil FOR VE3OL/VE3KGJ
