Re: statement when jaws starts

No, I'm not splitting the lines.  I may be pasting the lines below the wrong 
line.  Where exactly should I be pasting the lines with my name and version of 
Jaws? 

thanks 

Tracy  
  ----- Original Message ----- 
  From: Dave Carlson 
  To: jfw@xxxxxxxxxxxxx 
  Sent: Saturday, July 25, 2009 7:19 PM
  Subject: Re: statement when jaws starts


  Looks like you didn't correctly copy Bob's lines. Make absolutely sure that 
when you copy his lines, you don't have any wrapping of lines. Otherwise you'll 
split the original single lines into two lines each, and those will definitely 
not compile correctly.

  Dave

    ----- Original Message ----- 
    From: Tracy 
    To: jfw@xxxxxxxxxxxxx 
    Sent: Saturday, July 25, 2009 15:57
    Subject: Re: statement when jaws starts


    Good evening list, 

    I've been trying to change the message when Jaws starts but am getting the 
following error message.  Does anyone know what I may be doing wrong? 

    thanks in advance

    Tracy 

    Compile Error
     Function Say requires between 2 and 3 parameters not 1
    OK 
      ----- Original Message ----- 
      From: Shannon Hannah 
      To: jfw@xxxxxxxxxxxxx 
      Sent: Saturday, July 25, 2009 1:08 PM
      Subject: statement when jaws starts


      Alice, my instructions are very much the same as what Bob posted. His 
were better in point form, but I have posted the instructions I use below, 
which I believe I got from the old jfwlite list. I added the first line as a 
welcome message but you certainly can omit this first line. If you do want to 
have a message you can put whatever you want in here. Hope this helps and if 
you want write me off the list at:
      hannah74@xxxxxxx 
      Shannon 

      Announce Jaws version number and Date and Time on Load
      If you have more than one version of Jaws on your system, sometimes it is 
easy to get confused what version is loaded.  This script will say the number 
of Jaws that you are using, plus it will say the date and time when you first 
load jaws. 
      Press jaws key+0
      press control+shift+d to get to the default script file, 
      Press control L for the script list and arrow down to AutoStartEvent and 
enter. You are now in the auto start event script 
      arrow down to the line that says 
      let DefaultFirstTime = 1
      Go to the end of that line and enter and after that line paste in the 
following lines.  Of course change the version number to reflect the version  
and build of Jaws you are making the script change for.

      Say ("Welcome Shannon , ")
      Say ("Version 10", OT_message)
      Say ("Loaded on", OT_Message)
      SayUsingVoice (VCTX_PCCursor, SysGetDate (), OT_No_Disable)
      Say ("at", OT_Message)
      SayUsingVoice (VCTX_PCCursor, SysGetTime (), OT_No_Disable)

      Then press control S to compile the script and alt f4 to leave the script 
manager.

Other related posts: