RE: jaws not behaving properly on restart or hibernate mode on laptop
- From: "Cy Selfridge" <cyselfridge@xxxxxxxxxxx>
- To: <jfw@xxxxxxxxxxxxx>
- Date: Mon, 2 Aug 2010 17:47:19 -0600
I use W7 64 bit, JAWS 11 and a HP Pavilion laptop.
When it does come out of stand by mode not all things work as they should
including Outlook 2007.
The stand by or hybernate mode has been a problem as long as I can remember
from JAWS 7 forward so i just do not do it.
Cy, The Anasazi
From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx] On Behalf
Of GlenJan
Sent: Monday, August 02, 2010 5:41 PM
To: jfw@xxxxxxxxxxxxx
Subject: Re: jaws not behaving properly on restart or hibernate mode on
laptop
No sorry I don't. There is so much variation in configurations these days -
particularly with laptops - that it's hard to know where to start.
I once spent two days trying to figure out why ZoomText wouldn't install on
a laptop. The culpret in the end was a little software widget which came
with the laptop which was constantly scanning for a network printer.
Two days to find the widget, 30 seconds to delete it.
Glen
. There are so many variations with PC configs these days - particularly
with laptops - that it's
On 3-Aug-2010 09:35, John Fioravanti wrote:
Thanks for your thoughts; however, do you have any idea Why this problem
should occur simply with a restart as well?
John
----- Original Message -----
From: Bill White <mailto:billwhite92701@xxxxxxxxxxxxxx>
To: jfw@xxxxxxxxxxxxx
Sent: Monday, August 02, 2010 7:31 PM
Subject: Re: jaws not behaving properly on restart or hibernate mode on
laptop
I'm not an expert, but it sounds as if something is not being stored
properly when you go into and exit from hybernate mode.
Incidentally, Freedom Scientific does not recommend using either stand-by or
hybernate mode with JAWS.
Bill White billwhite92701@xxxxxxxxxxxxxx
----- Original Message -----
From: John Fioravanti <mailto:fioresq1@xxxxxxxxxxx>
To: jfw@xxxxxxxxxxxxx
Sent: Monday, August 02, 2010 3:13 PM
Subject: jaws not behaving properly on restart or hibernate mode on laptop
Hi: I am using jaws 10 on a toshiba laptop with xp pro. Recently I noticed
that when I restart the laptop computer or come out of hibernate mode, the
cursors (down and up arrows) in jaws are not behaving properly. In
otherwords, e.g., when I go to date and time and move down to read the time
setting, for instance, it does not read. Also, in word perfect 8, the
cursors read a blank, although if I go one character at a time to the left
it will read the letter.
Interestingly, when I shut down and turn the computer back on, everything
works fine. Any ideas? Thanks in advance. John Fioravanti
-- JFW related links: JFW homepage: http://www.freedomscientific.com/
Scripting mailing list:
http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com JFW List
instructions: To post a message to the list, send it to jfw@xxxxxxxxxxxxx To
unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: //www.freelists.org/archives/jfw Alternative
archives located at: http://n2.nabble.com/JAWS-for-Windows-f2145279.html If
you have any concerns about the list, post received from the list, or the
way the list is being run, do not post them to the list. Rather contact the
list owner at jfw-admins@xxxxxxxxxxxxxx
Other related posts:
