Several additions I would like to point out to this reply: 1) You may need to enable "Speak All" in the resulting FTP window so JAWS will tell you everything that is going on. It would also be a good idea to maximize the FTP window. 2) You do not need to type in the destination, FTP will launch and you can use the "open" command to open the ftp port to the desired machine. By the way, the destination can be a alpha-numeric name (i.e., freedomscientific.com) or an IP address (255.255.255.155). 3) You should be able to type in the word "help" once in the FTP window and a list of supported commands will be displayed. For help with a specific command you should be able to enter in the specific command with a question mark directly after it -- "open?" 4) Get help on mget (mget?) as this should allow you to do a Multiple Get! ---------------- Bill Gallik E-Mail: wfgallik@xxxxxxxxxxxxx "Do not follow where the path may lead. Go instead where there is no path and leave a trail." -Ralph Waldo Emerson -- To post a message to the list, send it to jfw@xxxxxxxxxxxxx To unsubscribe from this mailing list, send a message to jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.