Re: control c

MessageHi Gerald, 
I also am experiencing this problem.  The documentation for version 9.0 
addressed this issue.  I have spoken to FS techs about this , but was told that 
tech support cannot fix it until the cause can be properly identified.  Even 
though there sometimes is no announcement, the function has taken place.  If 
you unload jaws and hot-key it back it again will voice the action.   As you 
probably found out, once it fails it remains broken until jaws is reloaded. 
Let's hope that FS will find the bug soon. 
Roger   
 ----- Original Message ----- 
  From: Gerald Levy 
  To: jfw@xxxxxxxxxxxxx 
  Sent: Saturday, July 12, 2008 4:32 AM
  Subject: Re: control c



  I'm running JAWS 8, and I also experience the same problem with the Copy and 
Cut commands: JAWS sometimes doesn't speak when I press Control + C or  Control 
+ X.  I don't think there is any fix for this annoying problem, other than 
shutting down and restarting, which seems to restore the Copy and Cut commands 
to normal echo.  Unfortunately, there is no command that lets you verify the 
contents of the clipboard, so you just have to assume that the Copy or Cut 
command has been executed successfully. 


    ----- Original Message ----- 
    From: Jim 
    To: jfw@xxxxxxxxxxxxx 
    Sent: Saturday, July 12, 2008 6:05 AM
    Subject: control c


    Heya folks, Jaws 8 and 9 after an hour or so stops speaking when I do a 
control c for copying items, control paste is still spoken though. Does anyone 
know why this happens? cheers Jim

Other related posts: