RE: VB6 application retrofit
- From: "David Lockwood" <David.Lockwood@xxxxxxxxxxxx>
- To: <jfw@xxxxxxxxxxxxx>
- Date: Fri, 9 Feb 2007 07:58:34 -0600
Thank you, Alan. Freedom Scientific may have mention that site.
________________________________
From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx] On
Behalf Of Alan Clendinen
Sent: 09 February, 2007 5:20 AM
To: jfw@xxxxxxxxxxxxx
Subject: re: VB6 application retrofit
Hello David,
I am a blind programmer, however, I am unfamiliar with Visual Basic, but
if you don't find the answers you are looking for on this list, I
suggest you try blindprogramming.com, which is a great resource for
blind programmers. They also have a users group where you can get
assistance. I know there are several members who are very knowledgeable
with VB6. Good luck with your project!
Best regards,
Alan
David wrote:
Hello! I'm new to this list and need help. I am a developer with
Northrop Grumman CSC in Little Rock, Arkansas. I am attempting to
retrofit a vb6 application to State of Arkansas accessibility standards.
I have at least three major problems.
1) JAWS does not appear to read Crystal Reports. Is there a way
to do this?
2) Jaws can read text in the MDI form status bar from child forms
(because it remains active); however the vb application, while using an
MDI, does not use child forms, but rather programmatically controlled
forms. Is there a way to read from the MDI statusbar if not using child
forms?
3) Jaws reads left-hand labels by controls, but when the controls
and labels are on a frame with a frame caption, JAWS does NOT read the
labels and instead reads the frame caption. Is there a way to get JAWS
to read the labels on the frame?
Any help would be greatly appreciated.
David A. Lockwood
Northrop Grumman State and Local Systems
Other related posts:
