ALT-F, C will print checks in the 2001 version (file menu, print checks). You must first get printable checks, and tell Quicken which check type you have. Go to File menu, printer setup, for check printing. Again, this is how Quicken 2001 works. I have used Quicken for some time now and JFW 5.0 works well for: - check registry - reports setup and view I set up the automatic checking download using JFW 4.5, so do not know how well 5.0 works with this, but did have to use the JAWS cursor and play a bit to get all set correctly. BTW, I tried the Quicken 2004 Basic version with JFW 4.5 with very poor results. Hope this helps. Later, Jeff -----Original Message----- From: Richard Landau [mailto:richlandau@xxxxxxxxxxxxx] Sent: Sunday, January 11, 2004 10:39 AM To: jfw@xxxxxxxxxxxxx Subject: Re: Quicken Basic 2004 Hi, Thanks for the good advice about Quicken 2003. After you have entered data for a check, how do you tell it to print? That's one of the places that gives me trouble. Your response is encouraging especially as my remaining vision declines. Rich To post a message to the list, send it to jfw@xxxxxxxxxxxxx To unsubscribe from this mailing list, send a message to jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line. To post a message to the list, send it to jfw@xxxxxxxxxxxxx To unsubscribe from this mailing list, send a message to jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.