If you are using Vista, editing the jfw.ini file will not work. It always goes to the default card. HTH Mark -----Original Message----- From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx] On Behalf Of Roy Nickelson Sent: Saturday, May 31, 2008 3:34 PM To: jfw@xxxxxxxxxxxxx Subject: Re: PCI cards you do not need a new card, JAWS will suport the dectalk on com1 though com 8. If you are definantely needing com1 or com 2 you can chage the com port number on the card this can be accomplished the same way it always has since windows 95. Roy ----- Original Message ----- From: Cal <mailto:yesitscal@xxxxxxxxx> To: jfw@xxxxxxxxxxxxx Sent: Saturday, May 31, 2008 2:36 PM Subject: PCI cards Hi! I've been trying to get my DecTalk to work for the last several months and have had no success. The ports available to me don't seem to come up as comm1 or comm2, but rather comm5 and comm6. Is there a PCI card available that would correct this problem? I wish I could tell you what kind I'm using now, but I don't have a clue.