Re: JAWS repair after installing service pack 2?
- From: Chris Skarstad <toonhead5@xxxxxxxxxxx>
- To: jfw@xxxxxxxxxxxxx
- Date: Tue, 15 Mar 2005 00:37:03 -0600
Hi
Hmmm. Again, maybe the FS recommended settings aren't set properly on the
system?
it's also very possible that the resolution could be set wrong too. On my
system, JAWS won't work with anything less than 1024x768 resolution, 32 bit
colors. I tried the standard 800x600 with 256 colors, and things just would
not read properly so I set it back to 1024x768 and all worked fine
again. I also use a radion 7500 video card in this system so that could
also be a factor.
At 11:12 PM 3/14/2005, you wrote:
>I installed 6.0 on a system that came out of the box with service pack 2. I
>find that the ALT left arrow doesn't work in folders, the focus is
>frequently lost in large folders, and on the desk top. This is a Sony Vieo
>with 1MV ram and is fast as hell.
>
>Gene
>
>
>----- Original Message -----
>From: "Chris Skarstad" <toonhead5@xxxxxxxxxxx>
>To: <jfw@xxxxxxxxxxxxx>
>Sent: Tuesday, March 15, 2005 12:07 AM
>Subject: Re: JAWS repair after installing service pack 2?
>
>
> > hi. I never had any of the problems associated with arrowing in listviews
> > or other sluggishness. It's very possible that when SP 2 is installed that
> > some of the windows settings were set back to windows defalts, so it's
> > worth checking to make sure that all the FS recommended settings are still
> > in place. I have SP 2 running here and have no problems.
> > The only things I did when upgrading to SP 2 were I stopped the security
> > scenter service from running and disabled the windows firewall. Other than
> > that everything is just as it should be and JAWS 6 works like an absolute
> > dream on here, it's the smoothest and fastest version of JAWS to date.
> >
> >
> >
> > At 09:37 PM 3/14/2005, you wrote:
> >>Hi,
> >>Do people commonly repair JAWS simply because one installed Service Pack
> >>2.
> >>
> >>I foundthe down arrowing problem after opening and closing files happened
> >>with JAWS 6 beforeand after Service Pack 2. Others (I learn) encounter
> >>this with JAWS 5.xxx which surprised me.
> >>
> >>I know with no JAWS version running that there is no hesitating in down
> >>arrowing after closing files in list views.
> >>
> >>Some report this problem using M S N where many contacts exist in the
> >>listview and that Service Pack 2 slowed things down using MS N listviews
> >>dramatically.
> >>
> >>This is the la test I have learned.
> >>
> >>Manythanks.
> >>
> >>--
> >>To post a message to the list, send it to jfw@xxxxxxxxxxxxx
> >>To unsubscribe from this mailing list, send a message to
> >>jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
> >>Archives located at: //www.freelists.org/archives/jfw
> >>
> >>If you have any concerns about the list, post received from the list, or
> >>the way the list is being run, do not post them to the list. Rather
> >>contact the list owner at jfw-admins@xxxxxxxxxxxxxx
> >
> > --
> > To post a message to the list, send it to jfw@xxxxxxxxxxxxx
> > To unsubscribe from this mailing list, send a message to
> > jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
> > Archives located at: //www.freelists.org/archives/jfw
> >
> > If you have any concerns about the list, post received from the list, or
> > the way the list is being run, do not post them to the list. Rather
> > contact the list owner at jfw-admins@xxxxxxxxxxxxxx
> >
>
>
>--
>To post a message to the list, send it to jfw@xxxxxxxxxxxxx
>To unsubscribe from this mailing list, send a message to
>jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
>Archives located at: //www.freelists.org/archives/jfw
>
>If you have any concerns about the list, post received from the list, or
>the way the list is being run, do not post them to the list. Rather
>contact the list owner at jfw-admins@xxxxxxxxxxxxxx
--
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: //www.freelists.org/archives/jfw
If you have any concerns about the list, post received from the list, or the
way the list is being run, do not post them to the list. Rather contact the
list owner at jfw-admins@xxxxxxxxxxxxxx
Other related posts:
