Re: JAWS and multiple sound cards
- From: Keith Gillard <kgillard@xxxxxxx>
- To: jfw@xxxxxxxxxxxxx
- Date: Mon, 13 Jun 2005 18:16:46 -0600
It should also be pointed out that you will likely require separate speakers
for each sound card as well.
hth....Keith
----- Original Message -----
From: "Ricque" <ricque@xxxxxxxxxxxxx>
To: <jfw@xxxxxxxxxxxxx>
Sent: Monday, June 13, 2005 6:04 PM
Subject: Re: JAWS and multiple sound cards
> This can also be accomplished without editing any files.
> Most software audio players, and recorders,
> allow you to choose which audio device they will use for sound files.
> So, you just select one soundcard for your default playback, and that is
> the
> one Jaws will use.
> Select the other soundcard for your audio files, such as songs, in your
> individual audio programs.
> Note, if you have sound files assigned to certain Windows events,
> these will most likely be heard on the same soundcard as Jaws.
> If you want to hear Jaws on speakers by itself,
> then you are probably looking at an hardware speech synthesizer.
> Ricque
> ----- Original Message -----
> From: "Clark Friedrichs" <1clarkf@xxxxxxxxxxxxx>
> To: <jfw@xxxxxxxxxxxxx>
> Sent: Monday, June 13, 2005 7:27 PM
> Subject: Re: JAWS and multiple sound cards
>
>
> Hi, Joy;
>
> are you talking about using 2 different sound cards?
> if so;
>
> 2 sound cards.
>
> JAWS for Windows
>
> Category: Synthesizers
>
> Question:
>
> I have two sound cards on my computer. How do I make sure JAWS uses the
> one
> I want?
>
> Answer:
>
> Many JAWS users who also use music or audio production software want JAWS
> and Eloquence to speak through one sound card, while using the other for
> their
>
> production work. To do this, you need to edit a file called JFW.ini and
> install the updated Eloquence Speech driver in the accompanying zip file.
>
> Editing the jfw.ini file:
>
> 1. Using My Computer or Windows Explorer, browse your hard drive to the
> currently running version of JAWS and find the jfw.ini file in that
> folder.
>
> 2. Press ENTER to open.
>
> 3. You should find some lines that read:
>
> Synth1Name=eloq
>
> Synth1LongName=Eloquence for JAWS
>
> Synth1Driver=eloq
>
> The number doesn't matter, it may be 1, 2, or 3, but it must be the same
> for
> all entries for Eloquence.
>
> 4. Add the following line after the driver line: Synth1Port=SB Live! Wave
> Device Of course, you need to make sure that the synth number matches the
> other
>
> lines, so that if the Driver line read:
>
> Sytn3Driver=eloq
>
> Then the port line would read:
>
> Synth3Port=SB Live! Wave Device
>
> The text after the = sign in the Port line comes from Control Panel/Sound
> &
> Multimedia/Audio tab It must be one of the entries that can be chosen for
> Preferred
>
> Playback device.
>
> 5. Save your changes and exit Notepad.
>
> Now you must install the updated driver.As long as JAWS is running and
> speaking through Eloquence, eloq.jls cannot be simply overwritten when
> unzipping
>
> the file. You will need to switch to NoSpeech or MS SAPI to get the
> eloq.jls
> to overwrite properly.
>
> 1. Download the file from
>
> ftp://ftp.freedomscientific.com/users/hj/private/eloq.zip
>
> 2. Unzip the zip file into the root of the active JAWS directory where you
> made the change to the jfw.ini file.
>
> 3. Restart JAWS and it should now be speaking from the sound card you
> wanted.
>
> 4. If not, make sure the entries are correct in the jfw.ini file and that
> your sound card is indeed installed correctly. Most audio and music
> production
>
> software allows you to select a sound device for it as well, so it can use
> one sound card while JAWS uses another.
>
> http://www.freedomscientific.com/fs_support/BulletinView.cfm?QC=432
>
> -----
> Original Message -----
> From: "Joy Tilton" <
> joyctilton@xxxxxxxxxxx>
>
> To: <
> jfw@xxxxxxxxxxxxx>
>
> Sent: Tuesday, February 15, 2005 9:47 PM
> Subject: routing jaws to particular sound card
>
>> Trying to get jaws to go to a particular sound card at start up. How do
>> I=
>> do that?
>>
>> Joy C. Tilton
>>
> mailto:joyctilton@xxxxxxxxxxx
>>
> msn:
> joyctilton@xxxxxxxxxxx
>>
> AIM and skype address: joyctilton
>> check out my journal at
> http://joyctilton.livejournal.com
>>
>
>>
>> --
>> To post a message to the list, send it to
> jfw@xxxxxxxxxxxxx
>>
> To unsubscribe from this mailing list, send a message to
>>
> jfw-request@xxxxxxxxxxxxx
> with the word unsubscribe in the subject line.
>> Archives located at:
> //www.freelists.org/archives/jfw
>>
>
>> If you have any concerns about the list, post received from the list, or
>> the way the list is being run, do not post them to the list. Rather
>> contact the list owner at
> jfw-admins@xxxxxxxxxxxxxx
>
>>
>
> --
> To post a message to the list, send it to
> jfw@xxxxxxxxxxxxx
> To unsubscribe from this mailing list, send a message to
> jfw-request@xxxxxxxxxxxxx
> with the word unsubscribe in the subject line.
> Archives located at:
> //www.freelists.org/archives/jfw
>
> If you have any concerns about the list, post received from the list, or
> the
> way the list is being run, do not post them to the list. Rather contact
> the
> list owner at
> jfw-admins@xxxxxxxxxxxxxx
>
>
> ----- Original Message -----
> From: "Cy" <cselfridge@xxxxxxxxxxxxx>
> To: <jfw@xxxxxxxxxxxxx>
> Sent: Monday, June 13, 2005 3:40 PM
> Subject: JAWS and multiple sound cards
>
>
> Hi all,
> Could someone point me to the procedures for using multiple sound cards
> on a computer. One card for JAWS and the other for everything else.
> Thanks, Cy, the Ancient Okie...
>
> --
> No virus found in this outgoing message.
> Checked by AVG Anti-Virus.
> Version: 7.0.323 / Virus Database: 267.6.6 - Release Date: 6/8/2005
>
>
>
> --
> To post a message to the list, send it to jfw@xxxxxxxxxxxxx
> To unsubscribe from this mailing list, send a message to
> jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
> Archives located at: //www.freelists.org/archives/jfw
>
> If you have any concerns about the list, post received from the list, or
> the
> way the list is being run, do not post them to the list. Rather contact
> the
> list owner at jfw-admins@xxxxxxxxxxxxxx
>
> --
> To post a message to the list, send it to jfw@xxxxxxxxxxxxx
> To unsubscribe from this mailing list, send a message to
> jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
> Archives located at: //www.freelists.org/archives/jfw
>
> If you have any concerns about the list, post received from the list, or
> the
> way the list is being run, do not post them to the list. Rather contact
> the
> list owner at jfw-admins@xxxxxxxxxxxxxx
>
> --
> To post a message to the list, send it to jfw@xxxxxxxxxxxxx
> To unsubscribe from this mailing list, send a message to
> jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
> Archives located at: //www.freelists.org/archives/jfw
>
> If you have any concerns about the list, post received from the list, or
> the way the list is being run, do not post them to the list. Rather
> contact the list owner at jfw-admins@xxxxxxxxxxxxxx
>
--
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: //www.freelists.org/archives/jfw
If you have any concerns about the list, post received from the list, or the
way the list is being run, do not post them to the list. Rather contact the
list owner at jfw-admins@xxxxxxxxxxxxxx
Other related posts:
