Re: JAWS 8.0 and Dectalk Express
- From: "Patricia" <bcsarah.fan@xxxxxxxxx>
- To: <jfw@xxxxxxxxxxxxx>
- Date: Thu, 30 Nov 2006 07:43:06 -0800
I know I love my DecTalk synth, and mis it very much. I have yet to get my
JAWS CD and hear the new realspeak voices, but i know that if it is anything
like neospeech Kate or Paul I will have to stick with my DecTalk for sure.
Patricia
msn: bc_sarah_fan@xxxxxxxxxxx
----- Original Message -----
From: "Adrian Spratt" <A.Spratt@xxxxxxxxxxxxxxxx>
To: <jfw@xxxxxxxxxxxxx>
Sent: Thursday, November 30, 2006 5:46 AM
Subject: Re: JAWS 8.0 and Dectalk PC
Jim,
Later in the thread, you'll see I corrected the subject line. All I care
about is that other JAWS users understand that Dectalk Express still
functions with JAWS. Dectalk Express addresses all the concerns FS is
trying to handle with the new combination of Eloquence and SAPI 5 voices
but can't do in one. Dectalk Express is as or more responsive than
Eloquence, and the voice quality is pleasing and readily understood even
by sighted people unused to synthesized speech. As an external device, it
also avoids the sound card problems that people periodically report.
Regards,
Adrian
----- Original Message -----
From: "Jim Grimsby JR." <jimgrims@xxxxxxxxxxx>
Pardon me but I said nothing what so ever about the dectalk express I
said
some thing about the dectalk pc. The subject for the message in question
reads dectalk pc. So in this message you clearly are not talking about a
dectalk express. Unless the subject was in error. The dectalk pc and
the
dectalk express are not and never have been the same thing not now not
ever.
I post below an excerpt of what I said on this matter.
A misimpression I think not.
Hi the dectalk pc is not a supported device under windows 2k or xp.
Support
for this device dyed with windows 98. she is not going to be able to get
this device working under windows xp or 2k. Thanks hth
Also there is nothing wrong with how fs goes about setting this device
up.
You click on add remove there you can add a device or remove a device I
see
no problem with this what so ever. Thanks
-----Original Message-----
From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx] On
Behalf
Of Adrian Spratt
Sent: Thursday, November 30, 2006 5:07 AM
To: jfw@xxxxxxxxxxxxx
Subject: Re: JAWS 8.0 and Dectalk PC
Hi, Jim.
I need to correct the impression your messages on this subject have been
leaving. JAWS 8 works fine with Dectalk Express. Barbara's instructions
on
how to coordinate the two worked perfectly. The problem is that FS's
method
isn't intuitive. You need to click on the remove/change Eloquence button
in
the syntheisizer dialog to reach the other synthesizer options. After
that,
it's plain sailing. I use Windows XP.
Adrian
----- Original Message -----
From: "Jim Grimsby JR." <jimgrims@xxxxxxxxxxx>
Hi the dectalk pc is not a supported device under windows 2k or xp.
Support
for this device dyed with windows 98. she is not going to be able to get
this device working under windows xp or 2k. Thanks hth
--
JFW related links:
JFW homepage: http://www.freedomscientific.com/
Scripting mailing list:
http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com
JFW List instructions:
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: http://www.freelists.org/archives/jfw
If you have any concerns about the list, post received from the list, or
the
way the list is being run, do not post them to the list. Rather contact
the
list owner at jfw-admins@xxxxxxxxxxxxxx
--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.430 / Virus Database: 268.15.0/557 - Release Date:
11/29/2006
4:15 PM
--
JFW related links:
JFW homepage: http://www.freedomscientific.com/
Scripting mailing list:
http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com
JFW List instructions:
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: http://www.freelists.org/archives/jfw
If you have any concerns about the list, post received from the list, or
the way the list is being run, do not post them to the list. Rather
contact the list owner at jfw-admins@xxxxxxxxxxxxxx
--
JFW related links:
JFW homepage: http://www.freedomscientific.com/
Scripting mailing list:
http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com
JFW List instructions:
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: http://www.freelists.org/archives/jfw
If you have any concerns about the list, post received from the list, or
the way the list is being run, do not post them to the list. Rather
contact the list owner at jfw-admins@xxxxxxxxxxxxxx
--
JFW related links:
JFW homepage: http://www.freedomscientific.com/
Scripting mailing list:
http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com
JFW List instructions:
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: http://www.freelists.org/archives/jfw
If you have any concerns about the list, post received from the list, or the
way the list is being run, do not post them to the list. Rather contact the
list owner at jfw-admins@xxxxxxxxxxxxxx
- References:
- RE: JAWS 8.0 and Dectalk PC
- From: Jim Grimsby JR.
- Re: JAWS 8.0 and Dectalk PC
- From: Adrian Spratt
Other related posts:
- » Re: JAWS 8.0 and Dectalk Express
- » RE: JAWS 8.0 and Dectalk Express
- » RE: JAWS 8.0 and Dectalk Express
- » Re: JAWS 8.0 and Dectalk Express
- » RE: JAWS 8.0 and Dectalk Express
- » RE: JAWS 8.0 and Dectalk Express
- » Re: JAWS 8.0 and Dectalk Express
Jim,Later in the thread, you'll see I corrected the subject line. All I care about is that other JAWS users understand that Dectalk Express still functions with JAWS. Dectalk Express addresses all the concerns FS is trying to handle with the new combination of Eloquence and SAPI 5 voices but can't do in one. Dectalk Express is as or more responsive than Eloquence, and the voice quality is pleasing and readily understood even by sighted people unused to synthesized speech. As an external device, it also avoids the sound card problems that people periodically report.
Regards, Adrian----- Original Message ----- From: "Jim Grimsby JR." <jimgrims@xxxxxxxxxxx>
Pardon me but I said nothing what so ever about the dectalk express I saidsome thing about the dectalk pc. The subject for the message in question reads dectalk pc. So in this message you clearly are not talking about adectalk express. Unless the subject was in error. The dectalk pc and the dectalk express are not and never have been the same thing not now not ever.I post below an excerpt of what I said on this matter. A misimpression I think not.Hi the dectalk pc is not a supported device under windows 2k or xp. Supportfor this device dyed with windows 98. she is not going to be able to get this device working under windows xp or 2k. Thanks hthAlso there is nothing wrong with how fs goes about setting this device up. You click on add remove there you can add a device or remove a device I seeno problem with this what so ever. Thanks -----Original Message-----From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx] On BehalfOf Adrian Spratt Sent: Thursday, November 30, 2006 5:07 AM To: jfw@xxxxxxxxxxxxx Subject: Re: JAWS 8.0 and Dectalk PC Hi, Jim. I need to correct the impression your messages on this subject have beenleaving. JAWS 8 works fine with Dectalk Express. Barbara's instructions on how to coordinate the two worked perfectly. The problem is that FS's method isn't intuitive. You need to click on the remove/change Eloquence button in the syntheisizer dialog to reach the other synthesizer options. After that,it's plain sailing. I use Windows XP. Adrian ----- Original Message ----- From: "Jim Grimsby JR." <jimgrims@xxxxxxxxxxx>Hi the dectalk pc is not a supported device under windows 2k or xp. Supportfor this device dyed with windows 98. she is not going to be able to get this device working under windows xp or 2k. Thanks hth -- JFW related links: JFW homepage: http://www.freedomscientific.com/ Scripting mailing list: http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com JFW List instructions: To post a message to the list, send it to jfw@xxxxxxxxxxxxx To unsubscribe from this mailing list, send a message to jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line. Archives located at: http://www.freelists.org/archives/jfwIf you have any concerns about the list, post received from the list, or the way the list is being run, do not post them to the list. Rather contact thelist owner at jfw-admins@xxxxxxxxxxxxxx -- No virus found in this incoming message. Checked by AVG Free Edition.Version: 7.5.430 / Virus Database: 268.15.0/557 - Release Date: 11/29/20064:15 PM -- JFW related links: JFW homepage: http://www.freedomscientific.com/Scripting mailing list: http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.comJFW List instructions: To post a message to the list, send it to jfw@xxxxxxxxxxxxxTo unsubscribe from this mailing list, send a message to jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.Archives located at: http://www.freelists.org/archives/jfwIf you have any concerns about the list, post received from the list, or the way the list is being run, do not post them to the list. Rather contact the list owner at jfw-admins@xxxxxxxxxxxxxx
-- JFW related links: JFW homepage: http://www.freedomscientific.com/Scripting mailing list: http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com
JFW List instructions: To post a message to the list, send it to jfw@xxxxxxxxxxxxxTo unsubscribe from this mailing list, send a message to jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: http://www.freelists.org/archives/jfwIf you have any concerns about the list, post received from the list, or the way the list is being run, do not post them to the list. Rather contact the list owner at jfw-admins@xxxxxxxxxxxxxx
- RE: JAWS 8.0 and Dectalk PC
- From: Jim Grimsby JR.
- Re: JAWS 8.0 and Dectalk PC
- From: Adrian Spratt