RE: Authorization on OQO 01 Ultra
- From: "jim grimsby" <jimgrims@xxxxxxxxxxx>
- To: <jfw@xxxxxxxxxxxxx>
- Date: Sun, 31 Oct 2004 19:08:17 -0800
Yes it could!
-----Original Message-----
From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx] On =
Behalf
Of PossAble Consultancy
Sent: Sunday, October 31, 2004 8:16 AM
To: jfw@xxxxxxxxxxxxx
Subject: Re: Authorization on OQO 01 Ultra
Hi, I'm late into this thread, but couldn't it be authorised using a USB
floppy drive? Barry G
----- Original Message -----=20
From: Dale Leavens=20
To: jfw@xxxxxxxxxxxxx=20
Sent: Sunday, October 31, 2004 3:47 PM
Subject: Re: Authorization on OQO 01 Ultra
I would guess that the first thing to do would be to speak directly to =
=3D
Freedom Scientific. There used to be a way to move authorization from =
a =3D
floppy on another computer so long as the Jaws computer has access =3D
rights to that computer. Apparently it is no different than sharing =
=3D
other networked peripheral devices like CD-ROM drives or printers. So, =
=3D
another computer on the network with a floppy drive can be used to =3D
authorize a networked computer without a floppy drive. This may no =3D
longer be true but certainly it once was. The computer you are =
connected =3D
to should be able to provide you with the floppy for authorization as =
=3D
well as a CD for software installation.
Check with Freedom Scientific, surely they will know for sure.
----- Original Message -----=3D20
From: "John Miller" <n1umj@xxxxxxxxxxx>
To: <jfw@xxxxxxxxxxxxx>
Sent: Sunday, October 31, 2004 8:15 AM
Subject: Re: Authorization on OQO 01 Ultra
> Nope, I wouldn't think so.
> ----- Original Message -----=3D20
> From: "david poehlman" <david.poehlman@xxxxxxxxxxxxxxxxxxxxxxxx>
> To: <jfw@xxxxxxxxxxxxx>
> Sent: Sunday, October 31, 2004 8:08 AM
> Subject: Re: Authorization on OQO 01 Ultra
>=3D20
>=3D20
> > It doesn't seem then as though it should impeed the pocket format =
=3D
then.
> >
> > Johnnie Apple Seed
> >
> > ----- Original Message -----=3D20
> > From: "John Miller" <n1umj@xxxxxxxxxxx>
> > To: <jfw@xxxxxxxxxxxxx>
> > Sent: Sunday, October 31, 2004 7:53 AM
> > Subject: Re: Authorization on OQO 01 Ultra
> >
> >
> > physically? it's about as wide as a standard USB plug, if it's the =
=3D
USB one
> > that is, and maybe an inch and a half long give or take. I have =
one =3D
for my
> > laptop. I'd say it's about the size of a standard USB plug with =
out =3D
the=3D20
> > cord
> > coming off it.
> > ----- Original Message -----=3D20
> > From: "david poehlman" <david.poehlman@xxxxxxxxxxxxxxxxxxxxxxxx>
> > To: <jfw@xxxxxxxxxxxxx>
> > Sent: Sunday, October 31, 2004 7:33 AM
> > Subject: Re: Authorization on OQO 01 Ultra
> >
> >
> >> anybody know how big a dongle is?
> >>
> >> Johnnie Apple Seed
> >>
> >> ----- Original Message -----=3D20
> >> From: "Ronald Colombo" <roncol@xxxxxxxxxxxx>
> >> To: <jfw@xxxxxxxxxxxxx>
> >> Sent: Sunday, October 31, 2004 2:53 AM
> >> Subject: RE: Authorization on OQO 01 Ultra
> >>
> >>
> >>
> >> Hi Aman
> >>
> >> First of all, your comments on the video card; very valid, it =3D
hadn't
> >> occurred to me. I don't like the dongle alternative, it defeats =
the =3D
=3D3D
> >> pocket
> >> element. What about the Jaws networking facility? Isn't Jaws =3D
authorized =3D3D
> >> on
> >> each computer on the network and isn't the authorization done via =
=3D
one of=3D20
> >> =3D3D
> >> the
> >> PCs? If this doesn't work authorization via the internet will =
have =3D
to =3D3D
> >> do.
> >>
> >> Somebody asked about the thumb keyboard. I have the same thing on =
=3D
my =3D3D
> >> Nokia
> >> 9210i and I adopted the solution given to me i.e. using a paste =
=3D
that is =3D3D
> >> used
> >> by makers of stained glass panels. I got my wife to put a very =
=3D
small =3D3D
> >> blob on
> >> the f and j keys and others on the 1, 5 and 9 keys. I then use =
the =3D
first
> >> finger of my right hand to locate the keys. You wont write =
nobvels =3D
but I
> >> find it ok so much so that I use it for all my text messaging.
> >>
> >> Ciao,
> >>
> >> Ron.
> >> =3D3D20
> >> -----Original Message-----
> >> From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx] =
On =3D
=3D3D
> >> Behalf
> >> Of Aman Singer
> >> Sent: Saturday, October 30, 2004 3:31 PM
> >> To: jfw@xxxxxxxxxxxxx
> >> Subject: RE: Authorization on OQO 01 Ultra
> >>
> >> Hi.
> >> The authorization won't be a problem. You can either use the
> >> internet authorization which is being sent out to new customers, =
=3D
and =3D3D
> >> which
> >> you should be able to ask for, or a dongle. The OQO has a USB =
port. =3D
The
> >> problem, and I've asked the people at OQO about this and received =
=3D
no
> >> response as of yet, is about the video card working properly with =
=3D
Jaws.
> >> Since the video card is specialized I, for one, would like to see
> >> confirmation that JFW works with it before I buy, or at least =
have =3D
the
> >> opportunity to test without incurring their usual $300 restocking =
=3D
fee if=3D20
> >> =3D3D
> >> the
> >> program doesn't work.
> >> Aman =3D3D20
> >>
> >> -----Original Message-----
> >> From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx] =
On =3D
=3D3D
> >> Behalf
> >> Of Ronald Colombo
> >> Sent: October 30, 2004 7:33 AM
> >> To: jfw@xxxxxxxxxxxxx
> >> Subject: Authorization on OQO 01 Ultra
> >>
> >> Hi Listers,
> >> For anyone who hasn't heard of the OQO 01 Ultra, this is a pocket =
=3D
=3D3D
> >> computer
> >> with 256Mb ram, a 20GB hard disk running Windows xp. When used at =
=3D
home, =3D3D
> >> it
> >> has a docking station that enables a monitor and regular keyboard =
=3D
to be
> >> connected, making it a reasonable desk computer. PCWorld didn't =
=3D
give the
> >> pr-production model they evaluated, a good report but I feel sure =
=3D
that =3D3D
> >> all
> >> or most of the problems will be sorted out in the next series. =
=3D
Having a
> >> proper computer in my pocket running my usual xp applications AND =
=3D
Jaws =3D3D
> >> is
> >> the answere to the maiden's prayer, at least it would be mine if =
I =3D
was a
> >> maiden!
> >>
> >> Now for my question, in my system, it would be connected to a =3D
router as =3D3D
> >> part
> >> of my network. Installing Jaws from another computer is no =
problem =3D
but =3D3D
> >> can I
> >> also transfer an authorization key from this same computer?
> >>
> >> Ciao,
> >>
> >> Ron.
> >>
> >>
> >>
> >> --
> >> To post a message to the list, send it to jfw@xxxxxxxxxxxxx
> >> To unsubscribe from this mailing list, send a message to
> >> jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the =
subject =3D
line.
> >> Archives located at: //www.freelists.org/archives/jfw
> >>
> >> If you have any concerns about the list, post received from the =
=3D
list, or=3D20
> >> =3D3D
> >> the
> >> way the list is being run, do not post them to the list. Rather =
=3D
contact =3D3D
> >> the
> >> list owner at jfw-admins@xxxxxxxxxxxxxx
> >>
> >> --
> >> To post a message to the list, send it to jfw@xxxxxxxxxxxxx
> >> To unsubscribe from this mailing list, send a message to
> >> jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the =
subject =3D
line.
> >> Archives located at: //www.freelists.org/archives/jfw
> >>
> >> If you have any concerns about the list, post received from the =
=3D
list, or=3D20
> >> =3D3D
> >> the
> >> way the list is being run, do not post them to the list. Rather =
=3D
contact =3D3D
> >> the
> >> list owner at jfw-admins@xxxxxxxxxxxxxx
> >>
> >> --
> >> To post a message to the list, send it to jfw@xxxxxxxxxxxxx
> >> To unsubscribe from this mailing list, send a message to
> >> jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the =
subject =3D
line.
> >> Archives located at: //www.freelists.org/archives/jfw
> >>
> >> If you have any concerns about the list, post received from the =
=3D
list, or
> >> the
> >> way the list is being run, do not post them to the list. Rather =
=3D
contact
> >> the
> >> list owner at jfw-admins@xxxxxxxxxxxxxx
> >>
> >> --
> >> To post a message to the list, send it to jfw@xxxxxxxxxxxxx
> >> To unsubscribe from this mailing list, send a message to
> >> jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the =
subject =3D
line.
> >> Archives located at: //www.freelists.org/archives/jfw
> >>
> >> If you have any concerns about the list, post received from the =
=3D
list, or
> >> the way the list is being run, do not post them to the list. =
Rather
> >> contact the list owner at jfw-admins@xxxxxxxxxxxxxx
> >
> >
> > --
> > To post a message to the list, send it to jfw@xxxxxxxxxxxxx
> > To unsubscribe from this mailing list, send a message to
> > jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject =
=3D
line.
> > Archives located at: //www.freelists.org/archives/jfw
> >
> > If you have any concerns about the list, post received from the =
=3D
list, or=3D20
> > the
> > way the list is being run, do not post them to the list. Rather =
=3D
contact=3D20
> > the
> > list owner at jfw-admins@xxxxxxxxxxxxxx
> >
> > --
> > To post a message to the list, send it to jfw@xxxxxxxxxxxxx
> > To unsubscribe from this mailing list, send a message to=3D20
> > jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject =
=3D
line.
> > Archives located at: //www.freelists.org/archives/jfw
> >
> > If you have any concerns about the list, post received from the =
=3D
list, or=3D20
> > the way the list is being run, do not post them to the list. =
Rather=3D20
> > contact the list owner at jfw-admins@xxxxxxxxxxxxxx
> >=3D20
>=3D20
>=3D20
> --
> To post a message to the list, send it to jfw@xxxxxxxxxxxxx
> To unsubscribe from this mailing list, send a message to =3D
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject =
line.
> Archives located at: //www.freelists.org/archives/jfw
>=3D20
> If you have any concerns about the list, post received from the =
list, =3D
or the way the list is being run, do not post them to the list. Rather =
=3D
contact the list owner at jfw-admins@xxxxxxxxxxxxxx
>=20
--
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: //www.freelists.org/archives/jfw
If you have any concerns about the list, post received from the list, =
or
the way the list is being run, do not post them to the list. Rather =
contact
the list owner at jfw-admins@xxxxxxxxxxxxxx
--
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: //www.freelists.org/archives/jfw
If you have any concerns about the list, post received from the list, or =
the
way the list is being run, do not post them to the list. Rather contact =
the
list owner at jfw-admins@xxxxxxxxxxxxxx
--
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: //www.freelists.org/archives/jfw
If you have any concerns about the list, post received from the list, or the
way the list is being run, do not post them to the list. Rather contact the
list owner at jfw-admins@xxxxxxxxxxxxxx
Other related posts:
