[jawsscripts] Re: Speaking a text with a specified voice?
- From: Andrew Hart <ahart@xxxxxxxxxxxxx>
- To: jawsscripts@xxxxxxxxxxxxx
- Date: Tue, 12 Feb 2013 09:35:46 +1000
Alas, Pause is of no use here as it has nothing to do with speech.
Pause causes JAWS to wait until the screen has settled down following an
update.
Cheers.
On 12/02/2013 12:33 AM, Geoff Chapman wrote:
> Hmmm.
>
> you obviously must've also tried single/multiple pause statements between
> the
> Say (StrText)
> and the resetting of the voice profile, have you?
>
> like:
> SetActiveVoiceProfileByName ("Carmen2")
> SayString(sTrText)
> Pause ()
> Pause () ; varying amounts of these.
> SetActiveVoiceProfileByName ("Eloquence")
>
> That still doesn't really help you though probably in the need to find a
> function that informs jaws when the synthesizer has actually done speaking
> it's assigned text. especially if your texts are never the same lengths.
>
>
>
> ----- Original Message -----
> From: "Octavian Rasnita" <orasnita@xxxxxxxxx>
> To: <jawsscripts@xxxxxxxxxxxxx>
> Sent: Monday, February 11, 2013 6:36 PM
> Subject: [jawsscripts] Re: Speaking a text with a specified voice?
>
>
>> I gave the code in my first message. Here it is again:
>>
>> SetActiveVoiceProfileByName ("Carmen2")
>> SayString(sTrText)
>> SetActiveVoiceProfileByName ("Eloquence")
>>
>> The first line changes the voice to a specified voice profile, then it
>> should speak the message and then it should change the voice profile back
>> to Eloquence.
>> But the third line is executed immediately, and when it is executed, the
>> previously synthesizer is stopped so it doesn't speak anything.
>>
>> Thanks.
>>
>> Octavian
>>
>> --Octavian
>>
>> ----- Original Message -----
>> From: "Dang Manh Cuong" <dangmanhcuong@xxxxxxxxx>
>> To: <jawsscripts@xxxxxxxxxxxxx>
>> Sent: Monday, February 11, 2013 10:22 AM
>> Subject: [jawsscripts] Re: Speaking a text with a specified voice?
>>
>>
>>> Hi
>>> I don't do that for a long time, but if you could send me your code, I
>>> think
>>> I could help you.
>>> Cuong.
>>> ----- Original Message -----
>>> From: "Octavian Rasnita" <orasnita@xxxxxxxxx>
>>> To: <jawsscripts@xxxxxxxxxxxxx>
>>> Sent: Sunday, February 10, 2013 11:22 PM
>>> Subject: [jawsscripts] Re: Speaking a text with a specified voice?
>>>
>>>
>>>> Thanks, but as I said, I tried in 2 ways:
>>>>
>>>> 1. SetActiveVoiceProfileByName ("Carmen2")
>>>>
>>>> 2. I also tried using SetSynth ("eloq") but it didn't help either.
>>>>
>>>> The problem is that when a new voice is activated, it shuts Jaws down so
>>>> the
>>>> text spoken with the previous voice is not spoken at all.
>>>>
>>>> --Octavian
>>>>
>>>> ----- Original Message -----
>>>> From: "Dang Manh Cuong" <dangmanhcuong@xxxxxxxxx>
>>>> To: <jawsscripts@xxxxxxxxxxxxx>
>>>> Sent: Sunday, February 10, 2013 3:37 PM
>>>> Subject: [jawsscripts] Re: Speaking a text with a specified voice?
>>>>
>>>>
>>>>> Hi
>>>>> Use SetSynth to swich to the synthesizer of choice, and use
>>>>> SetVoicePerson
>>>>> to set name.
>>>>> HTH
>>>>> Cuong
>>>>> ----- Original Message -----
>>>>> From: "Octavian Rasnita" <orasnita@xxxxxxxxx>
>>>>> To: <jawsscripts@xxxxxxxxxxxxx>
>>>>> Sent: Sunday, February 10, 2013 3:07 PM
>>>>> Subject: [jawsscripts] Re: Speaking a text with a specified voice?
>>>>>
>>>>>
>>>>>> Thanks Stefan and Doug. Unfortunately it seems that there is no way to
>>>>>> instruct JAWS to speach a piece of text with a specified synthesizer,
>>>>>> although I was sure that this should be a simple thing.
>>>>>>
>>>>>> --Octavian
>>>>>>
>>>>>> ----- Original Message -----
>>>>>> From: "Doug Lee" <doug.lee@xxxxxxxxxxxxxxxx>
>>>>>> To: <jawsscripts@xxxxxxxxxxxxx>
>>>>>> Sent: Sunday, February 10, 2013 12:45 AM
>>>>>> Subject: [jawsscripts] Re: Speaking a text with a specified voice?
>>>>>>
>>>>>>
>>>>>>> SpeechInUse() actually tells you only whether or not speech, as
>>>>>>> opposed to Braille output, is being used by the JAWS user. It does
>>>>>>> not
>>>>>>> tell you when something is actually being said.
>>>>>>>
>>>>>>> On Sat, Feb 09, 2013 at 08:05:57PM +0200, Stefan Moisei wrote:
>>>>>>> Hi,
>>>>>>> The function SpeechInUse() should tell you if jaws is speaking or
>>>>>>> not.
>>>>>>>
>>>>>>> -----Original Message-----
>>>>>>> From: Octavian Rasnita
>>>>>>> Sent: Saturday, February 09, 2013 5:29 PM
>>>>>>> To: jawsscripts@xxxxxxxxxxxxx
>>>>>>> Subject: [jawsscripts] Speaking a text with a specified voice?
>>>>>>>
>>>>>>> Hi,
>>>>>>>
>>>>>>> Is it possible to create a JAWS script that speaks a text with a
>>>>>>> specified
>>>>>>> installed voice, then after it finishes, switch back to the default
>>>>>>> voice?
>>>>>>>
>>>>>>> I tried:
>>>>>>>
>>>>>>> SetActiveVoiceProfileByName ("Carmen2")
>>>>>>> SayString(sTrText)
>>>>>>> SetActiveVoiceProfileByName ("Eloquence")
>>>>>>>
>>>>>>> But nothing is spoken. When the function
>>>>>>> SetActiveVoiceProfileByName()
>>>>>>> is
>>>>>>> called the second time, it stops immediately the speech.
>>>>>>>
>>>>>>> I have found this by doing:
>>>>>>>
>>>>>>> SetActiveVoiceProfileByName ("Carmen2")
>>>>>>> SayString(sTrText)
>>>>>>> Delay (50, TRUE )
>>>>>>> SetActiveVoiceProfileByName ("Eloquence")
>>>>>>>
>>>>>>> This time the text was spoken as wanted, but I wasn't able to use the
>>>>>>> computer for a few seconds after that, because of the Delay()
>>>>>>> function.
>>>>>>>
>>>>>>> I guess that it is not possible to calculate how much time it would
>>>>>>> take
>>>>>>> to
>>>>>>> speak a certain text with a specified voice, but isn't possible to
>>>>>>> detect
>>>>>>> somehow when JAWS finished speaking, in order to be able to switch
>>>>>>> the
>>>>>>> voice
>>>>>>> in that moment?
>>>>>>>
>>>>>>> I also tried using SetSynth ("eloq") but it didn't help either.
>>>>>>>
>>>>>>> Thanks.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> --Octavian
>>>>>>>
>>>>>>> __________???
>>>>>>>
>>>>>>> View the list's information and change your settings at
>>>>>>> //www.freelists.org/list/jawsscripts
>>>>>>>
>>>>>>> __________???
>>>>>>>
>>>>>>> View the list's information and change your settings at
>>>>>>> //www.freelists.org/list/jawsscripts
>>>>>>>
>>>>>>> --
>>>>>>> Doug Lee, Senior Accessibility Programmer
>>>>>>> SSB BART Group - Accessibility-on-Demand
>>>>>>> mailto:doug.lee@xxxxxxxxxxxxxxxx http://www.ssbbartgroup.com
>>>>>>> "While they were saying among themselves it cannot be done,
>>>>>>> it was done." --Helen Keller
>>>>>>> __________�
>>>>>>>
>>>>>>> View the list's information and change your settings at
>>>>>>> //www.freelists.org/list/jawsscripts
>>>>>>>
>>>>>>
>>>>>> __________�
>>>>>>
>>>>>> View the list's information and change your settings at
>>>>>> //www.freelists.org/list/jawsscripts
>>>>>>
>>>>> ________________ Dang Manh Cuong HCMC University of Pedagogy: The
>>>>> Educational Psychology Mobile: +84 902-572-300 E-mail:
>>>>> dangmanhcuong@xxxxxxxxx Yahoo! ID: manhcuong0312 Skype name:
>>>>> dangmanhcuong
>>>>> facebook:
>>>>>
>>>>> __________�
>>>>>
>>>>> View the list's information and change your settings at
>>>>> //www.freelists.org/list/jawsscripts
>>>>>
>>>>
>>>> __________�
>>>>
>>>> View the list's information and change your settings at
>>>> //www.freelists.org/list/jawsscripts
>>>>
>>> ________________ Dang Manh Cuong HCMC University of Pedagogy: The
>>> Educational Psychology Mobile: +84 902-572-300 E-mail:
>>> dangmanhcuong@xxxxxxxxx Yahoo! ID: manhcuong0312 Skype name:
>>> dangmanhcuong
>>> facebook:
>>>
>>> __________�
>>>
>>> View the list's information and change your settings at
>>> //www.freelists.org/list/jawsscripts
>>>
>> __________�
>>
>> View the list's information and change your settings at
>> //www.freelists.org/list/jawsscripts
>>
>>
>
> __________�
>
> View the list's information and change your settings at
> //www.freelists.org/list/jawsscripts
>
>
>
__________�
View the list's information and change your settings at
//www.freelists.org/list/jawsscripts
Other related posts:
