On Thu 25 Oct, Tennant Stuart wrote: > > On Wed 24 Oct 2007 (14:55:10 +0100), Richard Mellish wrote: > > >I'm also contemplating getting a monitor a bit bigger than my present > >19 inch CRT one, but I'm concerned about everything being too small if > >I use it at its native resolution, or the possible degradation of > >quality if I use it at something similar to the resolution I'm using > >at present (about 680 pixels per inch). > > Thanks to Druck kindly working out an MDF for me, I'm now driving a 1366*768 > screen at its native resolution, using a 1368*768 screen mode with one pixel > dropped off either side (since 1366 is not a multiple of eight). > > BTW, Mike Batten should be careful that the quoted 1920*1200 is his monitor's > actual native resolution, and not just the highest one that can be input. I know some projectors will accept higher resolutions than they output but I have never heard of this with LCD TFT panels! Can anyone quote me a model that does? Chris Evans -- CJE Micro's / 4D 'RISC OS Specialists' Telephone: 01903 523222 Fax: 01903 523679 chris@xxxxxxxxxxxxxxx http://www.cjemicros.co.uk/ 78 Brighton Road, Worthing, West Sussex, BN11 2EN The most beautiful thing anyone can wear, is a smile! --- To alter your preferences or leave the group, visit //www.freelists.org/list/iyonix-support Other info via //www.freelists.org/webpage/iyonix-support