[iyonix-support] Re: Panther keeps switching itself off
- From: Tim Hill <tim@xxxxxxxxx>
- To: <iyonix-support@xxxxxxxxxxxxx>
- Date: Thu, 07 Mar 2013 14:18:17 +0000 (GMT)
In article <5328ab2ed8jcgl@xxxxxxxxxxxxxxx>, Jim Lesurf
<jcgl@xxxxxxxxxxxxxxx> wrote:
[Snip]
> John did say the cradle can be removed. But I don't know where the
> screws are or how to access them. Do I remove the facia? If so, how? If
> I've done this in the past I've long since forgotten all details!
IIRC, on an Iyonix, you remove all the screws holding the wraparound case
at the back and slide the case back and up. There is no need to touch the
facia. The hard drives, their cradles and the screws holding them
together should be obvious.
Of course, you will take lots of photos so you know exactly how to put it
all back together again afterwards. :-)
T
--
Tim Hill
..............................................................
www.timil.com
---
To alter your preferences or leave the group,
visit //www.freelists.org/list/iyonix-support
Other info via //www.freelists.org/webpage/iyonix-support
List-related queries to iyonix-support-moderators@xxxxxxxxxxxxx
Other related posts:
