Yes, but what do you get when you run it on the PDC??? Be sure to net stop w32time first. Pete On the Blackfoot River in the great state of Montana -----Original Message----- From: Adam Embrey [mailto:aembrey@xxxxxxxxxxx] Sent: Tuesday, August 14, 2001 3:58 PM To: [ISAserver.org Discussion List] Subject: [isalist] RE: w32tm http://www.ISAserver.org This is what I get C:\Documents and Settings\aembrey\Desktop>w32tm -v -once -test W32Time: BEGIN:InitAdjIncr W32Time: Adj 100138 , Incr 100144 fAdjust 0 W32Time: 100138 Adj!=Incr 100144 W32Time: END:Line 2473 W32Time: BEGIN:TsUpTheThread W32Time: END Line 1384 W32Time: TimeMMInit() W32Time: Kernel timer : using default maximum resolution W32Time: MaximumTime = 100144 W32Time: CurrentTime = 100144 W32Time: Timer calibrated, looped 1 times W32Time: BEGIN:InitTmCfg W32Time: END:Line 752 W32Time: BEGIN:InitTmCli W32Time: END:Line 2566 W32Time: BEGIN:InitTmData W32Time: END:Line 2588 W32Time: AvoidTimeSyncOnWan 0 W32Time: Using sticky Adj 100138 W32Time: BEGIN:CMOSSynchSet W32Time: Setting adjustment 100138 - Bool 0 W32Time: BEGIN:SetTSTimeRes W32Time: END:Line 1272 W32Time: END:Line 841 W32Time: BEGIN:InitializeDC W32Time: BEGIN:GetRole W32Time: Role is 'workstation' W32Time: END Line 670 W32Time: END:Line 702 W32Time: timeBeginPeriod: setting resolution 9 W32Time: BEGIN:TimeSync W32Time: BEGIN:FGetType W32Time: END Line 252 W32Time: BEGIN:FDoTimeNTPType W32Time: BEGIN:FDoNT5DSType W32Time: BEGIN:FBuildDCList W32Time: BEGIN:GetNT5DCAddress W32Time: Member of an Win2K domain. Looking for DCs. W32Time: Accepting previously discoverd DC W32Time: BEGIN:GetRole W32Time: Role is 'workstation' W32Time: END Line 670 W32Time: Calling DsGetDcNameA() for a WS W32Time: Using in domain DC as NO parent Domain DC W32Time: DC address is 192.168.100.15 W32Time: DC friendly name is \\aviagendc.us.aviagen.com W32Time: END Line 517 W32Time: The RID...844 W32Time: END Line 637 W32Time: New DomainController time source is located: W32Time: END Line 948 W32Time: BEGIN:ChooseNTPServer W32Time: END Line 2150 W32Time: BEGIN:GetSocketForSynch W32Time: NTP: ntpptrs[0] - 192.168.100.15 W32Time: Port Pinging to - 123 W32Time: Connecting to "\\aviagendc.us.aviagen.com" (192.168.100.15) W32Time: END:Line 1147 W32Time: BEGIN:GetDefaultRid W32Time: END Line 2324 W32Time: BEGIN:ComputeDelay W32Time: BEGIN:NTPTry -- init W32Time: END Line 1660 W32Time: BEGIN:NTPTry -- try W32Time: BEGIN:ComputeInterval W32Time: END Line 2449 W32Time: Sending to server 68 bytes... W32Time: Recv'ed from server 68 Bytes... W32Time: BEGIN:ComputeClientDigest W32Time: END Line 2286 W32Time: ComputeClientDigest() returned 0 W32Time: END Line 1880 W32Time: BEGIN:NTPTry -- delay W32Time: END Line 1984 W32Time: Round trip was 0ms W32Time: BEGIN:NTPTry -- gettime W32Time: BEGIN:Fgmtimetonttime W32Time: END Line 2533 W32Time: END Line 1970 W32Time: one-way delay is 0ms W32Time: END Line 1622 W32Time: END Line 366 W32Time: BEGIN:TimeDiff W32Time: ClockError --36 W32Time: END Line 2512 W32Time: BEGIN:FCheckTimeSanity W32Time: END Line 547 W32Time: BEGIN:SetTimeNow W32Time: ***Would have set system time*** W32Time: Time 8/14/2001 21:58:49:678 W32Time: END Line 1257 W32Time: Time was 58min 49.642s W32Time: Time is 58min 49.678s W32Time: Error -36ms W32Time: BEGIN:CheckLeapFlag W32Time: END:Line 583 W32Time: BEGIN:ComputePostTimeData W32Time: BEGIN:ComputeInterval W32Time: END Line 2449 W32Time: BEGIN:ComputeSleepStuff W32Time: Computed stagger is 0ms, bias is 0ms W32Time: Time until next sync - 2699.960s W32Time: END:Line 793 W32Time: END:Line 219 W32Time: END:Line 194 W32Time: BEGIN:TermTime W32Time: TimeMMCleanup() W32Time: BEGIN:FinishCleanup W32Time: BEGIN:TsUpTheThread W32Time: END Line 1384 W32Time: Time service stopped. W32Time: END:Line 383 -----Original Message----- From: David Dellanno [mailto:david@xxxxxxxxxx] Sent: Tuesday, August 14, 2001 2:51 PM To: [ISAserver.org Discussion List] Subject: [isalist] RE: w32tm http://www.ISAserver.org Try running this test from a command prompt to see if you are communicating with the NTP server and your UDP 123 port is open: w32tm -v -once -test -----Original Message----- From: Adam Embrey [mailto:aembrey@xxxxxxxxxxx] Sent: Tuesday, August 14, 2001 3:45 PM To: [ISAserver.org Discussion List] Subject: [isalist] w32tm http://www.ISAserver.org Hi Has anyone had any troubles with windows time service? I cannot get my w2k domain controller or another machine to synchronize time with an external time source. This has got my authentication all out of wack. Thanks for any help. Adam Embrey ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: david@xxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub') ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: aembrey@xxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub') ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: peter@xxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub')