[isalist] Re: Trigger Dial-up Connection on ISA Localhost
- From: "Roy Tsao" <caohuiming@xxxxxxxxxxxxx>
- To: <isalist@xxxxxxxxxxxxx>
- Date: Tue, 20 Oct 2009 10:13:36 +0800
Dear Jim,
1) Only one command in batch file: rasdial ConnectionName UserName Password
2) I am talking about Wan connection through Dial-up at server side.
It is ADSL and local ISP reset active ADSL connection every 48 hours to
change public IP address as dynamic.
If the reset occurs in the night time and no dial-up trigger, I could
not access to that ISA box from my side. So I would like to know
how to trigger dial-up on such situation.
Thanks,
Roy Tsao
From: Jim Harrison
Sent: Tuesday, October 20, 2009 2:23 AM
To: isalist@xxxxxxxxxxxxx
Subject: [isalist] Re: Trigger Dial-up Connection on ISA Localhost
Roy,
A1 - without seeing the cmd script details, I can't answer that
A2 - it's not clear if you're talking about the client or server side of the
VPN connection with regard to the IP address change?
If the VPN server IP changes, you'll have to use a dynamic DNS service to
ensure proper name resoluton. and use a name; not an IP address in the
connection definition.
If the client IP address changes, you'll have to open the VPN acess to any
remote IP address, or if you can get the IP range from the client ISP, use that
list.
Jim
--------------------------------------------------------------------------------
From: isalist-bounce@xxxxxxxxxxxxx [isalist-bounce@xxxxxxxxxxxxx] On Behalf Of
Roy Tsao [caohuiming@xxxxxxxxxxxxx]
Sent: Monday, October 19, 2009 6:42 AM
To: isalist@xxxxxxxxxxxxx
Subject: [isalist] Re: Trigger Dial-up Connection on ISA Localhost
Dear Jim,
Thanks a lot for your quick response.
It is one of ideas I also have but problems are:
- when create scheduled task by running rasdial command in batch
file, the command keeps running when I test that batch file
- The connection is PPPoE, local ISP reset/refresh dial-up connection
by assigning new dynamic IP address. If this occurs at time of
no client connection, how to ensure dial-up on ISA?
Thanks,
Roy Tsao
From: Jim Harrison
Sent: Monday, October 19, 2009 9:28 PM
To: isalist@xxxxxxxxxxxxx
Subject: [isalist] Re: Trigger Dial-up Connection on ISA Localhost
Create a scheduled task that runs on startup and use the information in this
TechNet article:
http://technet.microsoft.com/en-us/library/bb490979.aspx
From: isalist-bounce@xxxxxxxxxxxxx [mailto:isalist-bounce@xxxxxxxxxxxxx] On
Behalf Of Roy Tsao
Sent: Monday, October 19, 2009 5:57 AM
To: isalist@xxxxxxxxxxxxx
Subject: [isalist] Trigger Dial-up Connection on ISA Localhost
Hi,
ISA 2006 SE was deployed in remote side with Dial-up connetion.
All of clients are shutdown in the night time, so there is no active
connection from local network to outside then no trigger of dial-up
connection to ISA. When ISA is reboot at such time, connection to
ISA gets lot as ISA has no dial-up network.
My understanding is that localhost communication to outside does not
trigger dial-up connection, right? If so, what is your kind suggestion
to make ISA have dial-up without any connection request from local network.
With best regards,
Roy Tsoa
Other related posts:
