RE: Three homed DMZ
- From: "John Tolmachoff \(Lists\)" <johnlist@xxxxxxxxxxxxxxxxxxx>
- To: "'[ISAserver.org Discussion List]'" <isalist@xxxxxxxxxxxxx>
- Date: Thu, 21 Aug 2003 07:38:56 -0700
Your DMZ subnet needs to be a subnet derived from your assigned public IP
addresses.
That is not possible with the address you have listed.
What is your assigned public IP addresses?
John Tolmachoff MCSE CSSA
Engineer/Consultant
eServices For You
www.eservicesforyou.com
> -----Original Message-----
> From: Pranesh.K [mailto:cmspanu@xxxxxxxxx]
> Sent: Thursday, August 21, 2003 3:58 AM
> To: [ISAserver.org Discussion List]
> Subject: [isalist] RE: Three homed DMZ
>
> http://www.ISAserver.org
>
>
> Dear Sir,
> I am aslo using the same thing as u mentioned like
> Public ip address for DMZ setup i.e. 202.140.129.209/255.255.255.248
> Internet Ip Address : 202.140.129.49/255.255.255.248
> Internal LAN Ip Address : 192.168.1.0/255.255.255.0
>
> But the Problem is I am not able to ping to outside-world from DMZ Server
>
> Even though we have Configured the protocol rule for ANY protocol & BOTH
> direction and installation mode in Integrated Mode.Installed the latest
> Service pack.
>
> regards
>
> Pranesh K
>
> ------------------------------------------------------
> List Archives: http://www.webelists.com/cgi/lyris.pl?enter=isalist
> ISA Server Newsletter: http://www.isaserver.org/pages/newsletter.asp
> ISA Server FAQ: http://www.isaserver.org/pages/larticle.asp?type=FAQ
> ------------------------------------------------------
> Other Internet Software Marketing Sites:
> Leading Network Software Directory: http://www.serverfiles.com
> No.1 Exchange Server Resource Site: http://www.msexchange.org
> Windows Security Resource Site: http://www.windowsecurity.com/
> Network Security Library: http://www.secinf.net/
> Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com
> ------------------------------------------------------
> You are currently subscribed to this ISAserver.org Discussion List as:
> johnlist@xxxxxxxxxxxxxxxxxxx
> To unsubscribe send a blank email to $subst('Email.Unsub')
Other related posts:
