That seams like it's the only way to get this to work. I'll give it a shot. We've got way to many subnets to enter them all by hand, but doing it this way makes a lot of sense...never thought of it. Thanks, Brian ----- Original Message ----- From: "Jim Harrison" <jim@xxxxxxxxxxxx> To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx> Sent: Wednesday, January 23, 2002 9:35 AM Subject: [isalist] Re: "Spoof Attack" problem > http://www.ISAserver.org > > > Instead ofd entering each internal subnet individually, create a "classless" > route. > For instance, if the internal subnets are: > 10.0.0.1 - 10.0.127.254 with a netmask of 255.255.255.0, you would enter > this route as: > route -p add 10.0.0.0 mask 255.255.128.0 <YourRouterIP> > > Jim Harrison > MCP(NT4, W2K), A+, Network+, PCG > http://isaserver.org/authors/harrison/ > Read the books! > > ----- Original Message ----- > From: "Brian McCann" <bjm1287@xxxxxxxxxxxxxxxxxx> > To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx> > Sent: Tuesday, January 22, 2002 10:41 > Subject: [isalist] "Spoof Attack" problem > > > http://www.ISAserver.org > > > I've got a problem with a new ISA server setup. ISA is only installed for > it's firewall capabilities and it's loging. The server is a DC and a web > server (we have limited resources). It has 2 default gateways: one that > goes to the internet and one that goes to our internal network router. The > problem I'm having is that anytime I try accessing the server (via WWW) from > the internet, I get an event in the App. Log that says it detected a spoof > attack, and nothing loads. If I remove the internal gateway, it works fine. > Anyone have any ideas aside from entering static routes (since there are > about 100 of them)? I've already tried making the metric of the internal > gateway 2 instead of 1, and it still don't work. > > Thanks, > --Brian > > > ------------------------------------------------------ > You are currently subscribed to this ISAserver.org Discussion List as: > jim@xxxxxxxxxxxx > To unsubscribe send a blank email to $subst('Email.Unsub') > > > > ------------------------------------------------------ > You are currently subscribed to this ISAserver.org Discussion List as: bjm1287@xxxxxxx > To unsubscribe send a blank email to $subst('Email.Unsub') >