Problems with access to different ports from SNAT and Firewall Clients.
- From: "Dmitry Krasovsky" <Dkras@xxxxxxxxxxxx>
- To: <isalist@xxxxxxxxxxxxx>
- Date: Mon, 25 Nov 2002 11:04:30 +0300
I have installed and configured ISA Server and it seems to work ok, but
recently I've noticed a strange behavior of my server. I have configured two
protocol rules: one for SNAT clients (client address set for linux
workstations) and one one for Firewall clients (which work under windows in w2k
domain and use firewall client). Both rules allow All IP Traffic; but when I
try to connect to netbios share port (139) somewhere in the Internet (outside
LAT and DMZ) from firewall client it wouldn't work as well as when I connect to
jabber port 5269 from linux. And it does connect from linux to port 139 and
from windows to port 5269.
I made a test and found out that it's not a problem of linux and windows. I put
an IP address of one windows workstation into that client address set, and when
firewall client is enabled it does connect to jabber but doesnot to netbios
share, and when it's disabled it connects to nbshare but doesn't to jabber.
What am I doing wrong? It's vital to connect from linux workstaions to jabber
port because I use a jabber server inside intranet and a stable server exists
only for linux platform.
Thanks in advance.
Dmitry.
Other related posts:
- » Problems with access to different ports from SNAT and Firewall Clients.
