RE: Nortel VPN Client
- From: "Ball, Dan" <DBall@xxxxxxxxxxx>
- To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
- Date: Wed, 11 Jan 2006 08:23:15 -0500
Thanks, it's pretty close to the same setup I had for the Cisco VPN
clients, I had defined as:
3389 TCP Outbound
4500 UDP Send Receive
500 UDP Send Receive
I can add 4500 UDP Receive Send in there to test it when she stops by
this afternoon, otherwise it looks like most of it is already in there.
The more I think about it though, it appears that it is going to be more
hassle than it is worth. I think I'm going to set up a separate network
for her temporarily instead. I have some dark fiber running down near
that area, I'll just throw some transceivers on there and give her an IP
on a range outside of our network.
-----Original Message-----
From: Clark, Nick [mailto:nickc@xxxxxxxxxx]
Sent: Tuesday, January 10, 2006 11:40 PM
To: [ISAserver.org Discussion List]
Subject: [isalist] RE: Nortel VPN Client
http://www.ISAserver.org
Dan,
We had this issue quite some time ago and one of our guys found a setup
that
worked. I don't know if it still holds water but it was so difficult to
track
down we ended up keeping it for future reference. Below is a nutshell
of what
we've got to work without the FWC installed on our "visitors" computers.
The setup below applies to our ISA2000SE so I apologize if it doesn't
fit into
your 2004 configuration. We have to wait until after April 15 to jerk
around
with our network (unless something breaks - crossing fingers). If
you've got
other questions about my settings then just ask and I'll do my best to
pass it
along. [nd]
Protocol Definitions ->
Def. Name: IPSec NAT-T
Port Number: 4500
Port Type: UDP
Direction: Receive Send
Def. Name: IPSec IKE
Port Number: 500
Port Type: UDP
Direction: Send Receive
Protocol Rule ->
Allowed for the two definitions listed above
IP Packet Filters ->
Filter Name: ICMP Type 3, Code 4
Filter Type: Custom Filter
IP Protocol: ICMP
Direction: Both
Type: Fixed Type
Number: 3
Code: Fixed Code
Number: 4
Filter Name: Protocol 50
Filter Type: Custom Filter
IP Protocol: Custom Protocol
Protocol Number: 50
Direction: Both
>
Nick Clark, MCSE
Kerber, Eck & Braeckel LLP
1000 Myers Building
Springfield, IL 62701
Tel: 217-789-0960 x289
Mobile: 217-971-7005
Fax: 217-789-2822
http://www.kebcpa.com-----Original Message-----
> From: Ball, Dan [mailto:DBall@xxxxxxxxxxx]
> Sent: Tuesday, January 10, 2006 2:26 PM
> To: [ISAserver.org Discussion List]
> Subject: [isalist] Nortel VPN Client
>
> http://www.ISAserver.org
>
> I tried this afternoon to get a computer working on our network that
> needs to use the Nortel VPN Client. No success...
>
> Looks like I'll need to define the protocols in ISA for that client.
> I've tried searching Nortel.com, isaserver.org, and Microsoft's
> website for a port/protocol listing, but I can't even find the version
> of the client they're using! Does anyone know what ports the VPN
> client uses?
>
> Client: Nortel Contivity VPN Client v06_01.014
> OS: Windows XP SP2
> ISA: 2004SE
------------------------------------------------------
List Archives: http://www.webelists.com/cgi/lyris.pl?enter=isalist
ISA Server Newsletter: http://www.isaserver.org/pages/newsletter.asp
ISA Server FAQ: http://www.isaserver.org/pages/larticle.asp?type=FAQ
------------------------------------------------------
Visit TechGenix.com for more information about our other sites:
http://www.techgenix.com
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
dball@xxxxxxxxxxx
To unsubscribe visit http://www.webelists.com/cgi/lyris.pl?enter=isalist
Report abuse to listadmin@xxxxxxxxxxxxx
Other related posts:
