RE: No SSL, Clients Don't work

From: "Thomas W Shinder" <tshinder@xxxxxxxxxxxxxxxxxx>
To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
Date: Mon, 24 Mar 2003 20:07:46 -0600
Hi David,
 
If you're running SBS, you have a DNS server on the machine, and its
probably registering bogus address in the DNS. Am I close?
 
Thanks!
Tom

Thomas W Shinder 
www.isaserver.org/shinder 
ISA Server and Beyond: http://tinyurl.com/1jq1 
Configuring ISA Server: http://tinyurl.com/1llp 

        -----Original Message-----
        From: David Mineer [mailto:davemineer@xxxxxxx] 
        Sent: Monday, March 24, 2003 5:10 PM
        To: [ISAserver.org Discussion List]
        Subject: [isalist] No SSL, Clients Don't work
        
        
        http://www.ISAserver.org
        
        
        Friday morning, life was great.  My website was working.  I
could connect to the secure pages using SSL.  Clients connected just
fine using a combination of web proxy and secure nat.  MSN messenger
logon was automatic.  Other programs we use connected fine (Credit card
verification etc..).  Then, I rebooted.  Got the Proxy Chain Loop error
on every page I tried to access, both from inside and outside the isa
server.  I am running SBS 2000.  I know that aint the greatest but it
worked great until the reboot friday morning.
         
        Being Unable to work around the chain loop error I ran the ICW
(Internet Connection Wizard).  Got the web site back up and running.
However,  I cannot get SSL working.  I have Tom's Book and although that
seemed to get it working last time, this time it does not.  Also, my
workstations in the office can't connect to MSN messenger and I had to
change the proxy setting and actually include our local domain in the
list for "Bypass proxy server for Local domains" which I didn't have to
do before.  Simply checking the box was enough.  I get the feeling that
the secure nat isn't working properly because last time Everything went
great once that seemed to work.
         
        Any ideas are appreciated.
         
        My clients to dhcp and have the sbs server as the gateway.  How
else do I verify securenat connectivity?
         
        How do I change web proxy settings on the server.  I did get
some unable to pind to 127.0.0.1 errors, althought I don't see them
since the last reboot. 
         
        Anyway, I am confused and frustrated.  I usually figure things
out fairly quickly but since the upgrade to sbs 2000 about 3 weeks ago I
haven't had much peace.  I can only cross my fingers.
         
        TIA,
         
        ---------------------
        David Mineer
         
        ---------------------
        Don't wish it was easier; wish you were better.
        Don't wish for less problems; wish for more skills.
        Don't wish for less challenges; wish for more wisdom.
        
        ------------------------------------------------------
        List Archives:
http://www.webelists.com/cgi/lyris.pl?enter=isalist
        ISA Server Newsletter:
http://www.isaserver.org/pages/newsletter.asp
        ISA Server FAQ:
http://www.isaserver.org/pages/larticle.asp?type=FAQ
        ------------------------------------------------------
        Exchange Server Resource Site: http://www.msexchange.org/
        Windows Security Resource Site: http://www.windowsecurity.com/
        Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com
        ------------------------------------------------------
        You are currently subscribed to this ISAserver.org Discussion
List as: tshinder@xxxxxxxxxxxxxxxxxx
        To unsubscribe send a blank email to
$subst('Email.Unsub')
RE: No SSL, Clients Don't work

Other related posts:
