Check out this Article ID: Q233256 at www.microsoft.com/technet -----Original Message----- From: Scott Sandeman [mailto:sandeman@xxxxxxxxxxxxxxxxxxxxx] Sent: quarta-feira, 10 de outubro de 2001 10:11 To: [ISAserver.org Discussion List] Subject: [isalist] Re: IPSEC http://www.ISAserver.org Does anyone know what port IPSEC works on? Trying to set up internal port maps Thanks in advance.... Scott Sandeman > http://www.ISAserver.org > > > You're right; it won't work. > > Jim Harrison > MCP(2K), A+, Network+, PCG > > ----- Original Message ----- > From: <Adam.Staub@xxxxxxxxxxxxx> > To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx> > Sent: Tuesday, October 09, 2001 9:38 AM > Subject: [isalist] IPSEC > > > http://www.ISAserver.org > > > I know this has been asked before but can you run an IPSEC client > behind an ISA server? I think not because the ISA server is going to > rewrite the IP header info. I'm specifically looking at the Nortel > IPSEC client. > > > Thanks, > Adam > > > ********************************************************************* > Note: This E-mail and any attachments may be privileged and > confidential and protected from disclosure. If the reader of this > message is not the intended recipient, or an employee or agent > responsible for delivering this message to the intended recipient, you > are hereby notified that any disclosure, copying, distribution or use > of this E-mail and any attachments is strictly prohibited. If you > have received this E-mail in error, please notify us immediately by > returning it to the sender and deleting it from your computer system. > Thank you for your cooperation. > ********************************************************************** > > > ------------------------------------------------------ > You are currently subscribed to this ISAserver.org Discussion List as: > jim@xxxxxxxxxxxx To unsubscribe send a blank email to > $subst('Email.Unsub') > > > > ------------------------------------------------------ > You are currently subscribed to this ISAserver.org Discussion List as: > sandeman@xxxxxxxxxxxxxxxxxxxxx To unsubscribe send a blank email to > $subst('Email.Unsub') > ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: paranhos@xxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub')