Aha! I think I've found the problem. The AutoDiscovery information was just not being published. From Help File: <snip> To publish automatic discovery information 1. In the console tree of ISA Server Management, click Firewall Policy. Where? <ms-its:Y:\Microsoft ISA Server 2004 Beta\isa.chm::/FW_H_PublishAutoDisc.htm#> * Microsoft ISA Server 2004 * Server_Name * Configuration * Networks 2. In the details pane, select the applicable network (usually Internal). 3. On the Tasks tab, click Edit Selected Network. 4. On the Auto Discovery tab, select Publish automatic discovery information. 5. In Use this port for automatic discovery requests, type the port number on which the ISA Server should listen for WPAD and WSPAD requests. Notes * To open ISA Server Management, click Start, point to All Programs, point to Microsoft ISA Server, and then click ISA Server Management. * Click the Apply button in the details pane to save the changes and update the ISA Server configuration. </snip> Hopefully this will sort things out :) Cheers Tom. Jason ________________________________ From: Jason Merrique [mailto:j.merrique@xxxxxxxxxxxxxxx] Sent: 13 May 2004 14:27 To: [ISAserver.org Discussion List] Subject: [isalist] RE: Deploying ISA 2004 firewall client - how to enforce? http://www.ISAserver.org Cheers Tom, Would the answer be applicable for ISA 2004? Cheers, Jason ________________________________ From: Thomas W Shinder [mailto:tshinder@xxxxxxxxxxx] Sent: 13 May 2004 14:15 To: [ISAserver.org Discussion List] Subject: [isalist] RE: Deploying ISA 2004 firewall client - how to enforce? http://www.ISAserver.org Hi Jason, Here's a chapter from the ISA EDU kit. There a golden nuggets dispersed through this kit. http://www.tacteam.net/isaserverorg/isaedukit/5automate/5automate.htm HTH, Tom Thomas W Shinder www.isaserver.org/shinder ISA 2004 Beta - Get it now! http://www.microsoft.com/isaserver/beta/default.asp <http://www.microsoft.com/isaserver/beta/default.asp> ISA Server and Beyond: http://tinyurl.com/1jq1 Configuring ISA Server: http://tinyurl.com/1llp -----Original Message----- From: Jason Merrique [mailto:j.merrique@xxxxxxxxxxxxxxx] Sent: Thursday, May 13, 2004 7:53 AM To: [ISAserver.org Discussion List] Subject: [isalist] RE: Deploying ISA 2004 firewall client - how to enforce? http://www.ISAserver.org Hi Tom, Well thats what I thought.... I've added the WPAD entries to the DHCP scope options (not sure what you mean by DNS though....) but the firewall clients still aren't automatically detecting the server. They can if I *manually* set it to do that, or to "Detect now". It just isn't Enabled by default. It's driving me nuts :\ Cheers, Jason a blank email to $subst('Email.Unsub')