copernic works with winsocks port 1080. i configured it this way and i've experienced no problems Mensaje citado por: James Bedster <James.bedster@xxxxxxxxxx>: > http://www.ISAserver.org > > > Well the good news is that I have Copernic working on both the server > and client machines. I did have to enable something but the bad news is > I can't remember what it was at the moment. So FWIW this program will > work behind ISA. I'm running SBS2000 - everything on one machine. > Works for me! > > Jim Bedster > > > -----Original Message----- > > From: Cosman Peter [mailto:peter.cosman@xxxxxxxxxxx] > > Sent: 20 February 2002 11:09 > > To: [ISAserver.org Discussion List] > > Subject: [isalist] RE: Copernic > > > > > > http://www.ISAserver.org > > > > > > Bruno, > > > > I have the same problem with Copernic. The proxy settings of copernic > > doesn't work with ISA server and there's no info about this > > issue at the > > copernic or the MS website. > > > > Peter. > > > > > > -----Oorspronkelijk bericht----- > > Van: Bruno ROUY [mailto:bruno.rouy@xxxxxxxx] > > Verzonden: woensdag 20 februari 2002 11:47 > > Aan: [ISAserver.org Discussion List] > > Onderwerp: [isalist] Copernic > > > > > > http://www.ISAserver.org > > > > > > Hello, > > The software Copernic don't pass with ISA . any idea ? > > Bruno > > > > ---------------------------------------------------- -- > > You are currently subscribed to this ISAserver.org Discussion List as: > > peter.cosman@xxxxxxxxxxx > > To unsubscribe send a blank email to > > $subst('Email.Unsub') > > > > ---------------------------------------------------- -- > > You are currently subscribed to this ISAserver.org Discussion > > List as: james.bedster@xxxxxxxxxx > > To unsubscribe send a blank email to > > $subst('Email.Unsub') > > > > > > ------------------------------------------------------ > You are currently subscribed to this ISAserver.org Discussion List as: > hluna@xxxxxxxxxxxx > To unsubscribe send a blank email to leave-isalist- 244299M@xxxxxxxxxxxxx >