[isalist] Re: Configuration Advice for Multiple IP's
- From: "Jim Harrison" <Jim@xxxxxxxxxxxx>
- To: <isalist@xxxxxxxxxxxxx>
- Date: Thu, 15 Mar 2007 14:08:37 -0700
http://www.ISAserver.org
-------------------------------------------------------
Already written for you:
http://www.microsoft.com/technet/isa/2006/deployment/default.mspx
http://www.isaserver.org/articles_tutorials/publishing
-----Original Message-----
From: isalist-bounce@xxxxxxxxxxxxx [mailto:isalist-bounce@xxxxxxxxxxxxx]
On Behalf Of Danny
Sent: Thursday, March 15, 2007 10:26 AM
To: isalist@xxxxxxxxxxxxx
Subject: [isalist] Re: Configuration Advice for Multiple IP's
Can you please advise how to get this working in ISA 2006?
Thanks!
On 2/5/07, Jim Harrison <Jim@xxxxxxxxxxxx> wrote:
There is a problem for ISA 2004, but not for ISA 2006.
From: isalist-bounce@xxxxxxxxxxxxx
[mailto:isalist-bounce@xxxxxxxxxxxxx] On Behalf Of Andy Haigh
Sent: Monday, February 05, 2007 7:19 AM
To: isalist@xxxxxxxxxxxxx
Subject: [isalist] Re: Configuration Advice for Multiple IP's
I thought there was a problem with using forms based
authentication for OWA and then trying to use basic for Activesync and
RPC over HTTP.
Are you using the procedure set out here?
http://www.isaserver.org/tutorials/2004pubowamobile.html
As the warning states it's not been stressed tested I didn't
want to use it in this case.
Thanks
Andy
________________________________
From: isalist-bounce@xxxxxxxxxxxxx
<mailto:isalist-bounce@xxxxxxxxxxxxx>
[mailto:isalist-bounce@xxxxxxxxxxxxx] On Behalf Of Steve Moffat
Sent: Monday, 5 February 2007 9:29 PM
To: ISA Mailing List
Subject: [isalist] Re: Configuration Advice for Multiple IP's
What's the issue? I build many ISA servers with only 1 IP
address and publish those services successfully on ISA 2004/ 2006.
S
From: isalist-bounce@xxxxxxxxxxxxx
[mailto:isalist-bounce@xxxxxxxxxxxxx] On Behalf Of Andy Haigh
Sent: Monday, February 05, 2007 3:28 AM
To: ISA Mailing List
Subject: [isalist] Configuration Advice for Multiple IP's
Hi,
I am after some advice on the best way to configure ISA Server
for what I am trying to do. The scenario is:
Current
Windows 2003 SP1 (fully patched)
ISA Server 2004 SP2
Netgear ADSL Router with Packet Filter rules setup and port
forwarding.
ADSL 1.5Mb/256kb service with Single Static IP Address, this is
basically a residential service.
Problems caused here is with allowing Forms based OWA,
Activesync, RPC over HTTP, VPN all through the single IP address. I know
there was a workaround published for this but I doubt it would be
supported by MS.
The client is having a business grade SHDSL service installed
with a /29 subnet with a Cisco 878 router as the interface.
We are aiming to use both services by adding a 3rd network card
and connect the new SHDSL service to it, so that web browsing traffic
can use the current ADSL link and the other services can use the SHDSL
link. Thereby we can create multiple listeners for the different access
requirements via the SHDSL link, though I have read that ISA2006 gets
round this problem.
I am also going to upgrade to ISA Server 2006, which I will do
prior to connecting up the new service. Allow that change to bed in
prior to implementing another!
Any advice or direction would be appreciated.
Thanks
Andy
All mail to and from this domain is GFI-scanned.
--
CPDE - Certified Petroleum Distribution Engineer
CCBC - Certified Canadian Beer Consumer
------------------------------------------------------
List Archives: //www.freelists.org/archives/isalist/
ISA Server Newsletter: http://www.isaserver.org/pages/newsletter.asp
ISA Server Articles and Tutorials: http://www.isaserver.org/articles_tutorials/
ISA Server Blogs: http://blogs.isaserver.org/
------------------------------------------------------
Visit TechGenix.com for more information about our other sites:
http://www.techgenix.com
------------------------------------------------------
To unsubscribe visit http://www.isaserver.org/pages/isalist.asp
Report abuse to listadmin@xxxxxxxxxxxxx
Other related posts:
