Hi, I am after some advice on the best way to configure ISA Server for what I am trying to do. The scenario is: Current Windows 2003 SP1 (fully patched) ISA Server 2004 SP2 Netgear ADSL Router with Packet Filter rules setup and port forwarding. ADSL 1.5Mb/256kb service with Single Static IP Address, this is basically a residential service. Problems caused here is with allowing Forms based OWA, Activesync, RPC over HTTP, VPN all through the single IP address. I know there was a workaround published for this but I doubt it would be supported by MS. The client is having a business grade SHDSL service installed with a /29 subnet with a Cisco 878 router as the interface. We are aiming to use both services by adding a 3rd network card and connect the new SHDSL service to it, so that web browsing traffic can use the current ADSL link and the other services can use the SHDSL link. Thereby we can create multiple listeners for the different access requirements via the SHDSL link, though I have read that ISA2006 gets round this problem. I am also going to upgrade to ISA Server 2006, which I will do prior to connecting up the new service. Allow that change to bed in prior to implementing another! Any advice or direction would be appreciated. Thanks Andy