RE: Advise on ADSL setup

From: "Mark Strangways" <strangconst@xxxxxxxxxx>
To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
Date: Thu, 28 Feb 2002 08:39:59 -0500
Does anyone else see the problems with the same subnet IP's. Or is it just one 
of those "first thing in the morning" mirages. ?

It appears as if the set-up is using a 192.168.0.0 subnet  for it's Internet 
Connection and also an 192.168.0.0 subnet for it's Internal Network. This 
should fail for obvious reasons. 

Somewhat confused here !

Mark
  ----- Original Message ----- 
  From: Ahmad Jamal 
  To: [ISAserver.org Discussion List] 
  Sent: Thursday, February 28, 2002 7:01 AM
  Subject: [isalist] RE: Advise on ADSL setup


  http://www.ISAserver.org


  Hi Anthony,



  Yes, that the plan for doing this, I used cross over cable cat5... Ah!!!!!!!! 
Look to that, I will remove the hub and just used the cross over cable and same 
configuration IP apply.



  Somehow my eyes did not see this clear, Thanks Anthony!



  Ahmad



  -----Original Message-----
  From: Anthony Dowling [mailto:antman147@xxxxxxxxxx] 
  Sent: Thursday, February 28, 2002 2:38 PM
  To: [ISAserver.org Discussion List]
  Subject: [isalist] RE: Advise on ADSL setup



  http://www.ISAserver.org

  It looks like that is what Ahmad was meaning first off.



  Just he was using a Hub Between the ADSL Modem, and the second ethernet card. 
 (A cross Over Cable here would remove the need for a hub).



  And the First NIC was going to a separate Switch.



  Cheers Ants

    -----Original Message-----
    From: Paul [mailto:Paul@xxxxxxxxxxxxxxxxxx]
    Sent: Friday, 1 March 2002 00:15
    To: [ISAserver.org Discussion List]
    Subject: [isalist] RE: Advise on ADSL setup

    http://www.ISAserver.org

    Ahmad,

                Unless your ADSL modem is also a router running NAT then I 
would advise (others correct me if I'm wrong), you should have your ADSL modem 
going to you're 1st nic then your second nic going to your hub/switch, if you 
plug your modem/router strait into the hub/switch then other machines on the 
net can bypass your ISA server.



    Thanks.. Paul



    -----Original Message-----
    From: Ahmad Jamal [mailto:abobader@xxxxxxxx] 
    Sent: 28 February 2002 11:20
    To: [ISAserver.org Discussion List]
    Subject: [isalist] Advise on ADSL setup



    http://www.ISAserver.org

    Hi all,



    I uninstall ISA and did another setup:



    The first Ethernet card (192.168.1.2) to my LAN switch.

    The second Ethernet card (192.168.1.4) to a hub.

    ADSL modem (192.168.1.254) to a hub.



    The second Ethernet card has the gateway as the ADSL IP (192.168.1.254) and 
the ISP DNS.



    Now I can have internet link fine, is that setup good before I install the 
ISA again? and what the disadvantage of it, thanks in advanced.



    Ahmad Jamal





    "I have Infinilink i510 ADSL modem, was connection to my Cisco LAN switch 
and giving the internal IP as 192.168.1.254. All my workstations use the ASDL 
IP as the gateway, ISP DNS and everyone sharing the internet.

    I install ISA on WIN2K, with 2 Ethernet cards, one giving local IP 
192.168.1.2  connect to my LAN, the second as dynamic (DHCP) and connected to 
the ADSL.

     I start with 
http://www.isaserver.org/pages/tutorials/setting_up_machine_before_isa_installtion.htm

    And http://www.isaserver.org/pages/tutorials/adsl_setup.htm

    I have DC as 192.168.1.1, The ISA can not see the ADSL, no matters what I 
tried, thanks in advanced."





    ------------------------------------------------------
    You are currently subscribed to this ISAserver.org Discussion List as: 
paul@xxxxxxxxxxxxxxxxxx
    To unsubscribe send a blank email to $subst('Email.Unsub') 

    ------------------------------------------------------
    You are currently subscribed to this ISAserver.org Discussion List as: 
antman147@xxxxxxxxxx
    To unsubscribe send a blank email to $subst('Email.Unsub') 

  ------------------------------------------------------
  You are currently subscribed to this ISAserver.org Discussion List as: 
abobader@xxxxxxxx
  To unsubscribe send a blank email to $subst('Email.Unsub') 

  ------------------------------------------------------
  You are currently subscribed to this ISAserver.org Discussion List as: 
strangconst@xxxxxxxxxx
  To unsubscribe send a blank email to $subst('Email.Unsub')
RE: Advise on ADSL setup

Other related posts:
