RE: Advise on ADSL setup
- From: "Paul" <Paul@xxxxxxxxxxxxxxxxxx>
- To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
- Date: Thu, 28 Feb 2002 11:15:27 -0000
Ahmad,
Unless your ADSL modem is also a router running NAT then I
would advise (others correct me if I'm wrong), you should have your ADSL
modem going to you're 1st nic then your second nic going to your
hub/switch, if you plug your modem/router strait into the hub/switch
then other machines on the net can bypass your ISA server.
Thanks.. Paul
-----Original Message-----
From: Ahmad Jamal [mailto:abobader@xxxxxxxx]
Sent: 28 February 2002 11:20
To: [ISAserver.org Discussion List]
Subject: [isalist] Advise on ADSL setup
http://www.ISAserver.org
Hi all,
I uninstall ISA and did another setup:
The first Ethernet card (192.168.1.2) to my LAN switch.
The second Ethernet card (192.168.1.4) to a hub.
ADSL modem (192.168.1.254) to a hub.
The second Ethernet card has the gateway as the ADSL IP (192.168.1.254)
and the ISP DNS.
Now I can have internet link fine, is that setup good before I install
the ISA again? and what the disadvantage of it, thanks in advanced.
Ahmad Jamal
"I have Infinilink i510 ADSL modem, was connection to my Cisco LAN
switch and giving the internal IP as 192.168.1.254. All my workstations
use the ASDL IP as the gateway, ISP DNS and everyone sharing the
internet.
I install ISA on WIN2K, with 2 Ethernet cards, one giving local IP
192.168.1.2 connect to my LAN, the second as dynamic (DHCP) and
connected to the ADSL.
I start with
http://www.isaserver.org/pages/tutorials/setting_up_machine_before_isa_i
nstalltion.htm
And http://www.isaserver.org/pages/tutorials/adsl_setup.htm
I have DC as 192.168.1.1, The ISA can not see the ADSL, no matters what
I tried, thanks in advanced."
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
paul@xxxxxxxxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
Other related posts:
