the /etc/mdadm.conf doesnot exists..
i used mdadm command to create the raid array.
From: knura@xxxxxxxxx
To: ilugc@xxxxxxxxxxxxx
Subject: Re: [Ilugc] ERRORS DURING RAID ARRAY CREATION: HELP NEEDED
Date: Wed, 5 Mar 2008 20:28:53 +0530
On Wednesday 05 Mar 2008, swapan karmakar wrote:
i have created a raid array /dev/md0 that has 2 active devices (
/dev/sda10 and /dev/sda11)and 1 spare device (/dev/sda12) when i
Defining a raid array with all partitions on one hard disk is OK if you
are doing this for learning purpose but *not* for a production system.
Did you create the raid array manually or use some GUI tool? Pls. name
the tool.
format and mount the array manually,there is no problem but as soon^^^^^^^^^^^^^^^^^^
as i make an entry into the /etc/fstab file and reboot the system,
the system goes into Maintenance mode reporting an error that
"fsck.ext3:No such file or directory found while trying to open
/dev/md0" if i remove the entry from /etc/fstab . it works fine..but
then i have to manually mount it everytime.
this is happening first time in the usual process of creating RAID
array from 3 diff partitons on a single SATA drive. my os is Fedora
8.
i tried to make a node file for /dev/md0 but it already exists..and
also there is no mdadm.conf file crerated.
This is the problem.
You need to create this file (refer man mdadm.conf). It is in /etc dir
structure.
HTH,
-- Arun Khan
_______________________________________________
To unsubscribe, email ilugc-request@xxxxxxxxxxxxx with
"unsubscribe <password> <address>"
in the subject or body of the message.
http://www.ae.iitm.ac.in/mailman/listinfo/ilugc
