Hi,
I just got a dataone connection with the UT-300R2 modem. But i haven't
been able to connect even once.
I tried to connect using rp-pppoe in debian, but i get a CHAP failure even
though the username and password are correct.
pppd 2.4.2 started by root, uid 0
pppd[3247]: Using interface ppp0
pppd[3247]: not replacing default route to eth0 [192.168.1.1]
pppd[3247]: local IP address 10.64.64.64
pppd[3247]: remote IP address 10.112.112.112
pppd[3247]: Starting link
pppd[3247]: Serial connection established.
pppd[3247]: Connect: ppp0 <--> /dev/pts/0
pppoe[3264]: PADS: Service-Name: ''
pppoe[3264]: PPP session is 444
pppd[3247]: CHAP authentication failed: The account or password is
incorrect.
pppd[3247]: Connection terminated.
Then, i configured the PPPOE connection in the modem itself through the web
interface. I used vpi and vci values 0 and 35 respectively. The PPoE LED lights
up but there's no connection. This is the system log of the modem firmware.
DSL Carrier is up
pppd 2.4.1 started by root, uid 0
MRU: 1500
PPPoE Connect with IP Address 10.64.64.64
PPPoE Connection Successfully Established
PPPoE Connect with Gateway IP Address: 10.112.112.112
local IP address 10.64.64.64
remote IP address 10.112.112.112
Got connection: d40b
Saved Session ID: 0
Connect: ppp0 {--} nas0
MRU: 1500
CHAP authentication failed
MRU: 1500
Connection terminated.
Doing disconnect
The default gateway adress 10.112.112.112 gets assigned automatically. i
dont know if its right.
Please Help. Thanks in advance.
