[PCB_FORUM] Re: signoise.run v15.2
- From: "westfeldt" <westfeldt_nbcd@xxxxxxxxx>
- To: icu-pcb-forum@xxxxxxxxxxxxx
- Date: Fri, 26 Aug 2005 10:11:23 -0600
Thanks, that worked. That backslash in my version used to work, but no
more.
Patrick Westfeldt, Jr.
720-406-0887
_____
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of
george.h.patrick@xxxxxxxxxxxxxx
Sent: Friday, August 26, 2005 9:51 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: signoise.run v15.2
Here is what I use, works like a charm :)
set SIGNAL_RUN_DIRECTORY = c:/temp/signoise.run
--
George Patrick
Tektronix, Inc.
Central Engineering, PCB Design Group
P.O. Box 500, M/S 39-512
Beaverton, OR 97077-0001
Phone: 503-627-5272 Fax: 503-627-5587 <http://www.tektronix.com/>
http://www.tektronix.com <http://www.pcb-designer.com/>
http://www.pcb-designer.com
It's my opinion, not Tektronix'
-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of westfeldt
Sent: Friday, August 26, 2005 07:33
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] signoise.run v15.2
I used to have "set SIGNAL_RUN_DIRECTORY C:\temp/signoise.run" in my env
file, to avoid allegro creating this directory all over the place. What is
the
correct set command for v15.2?
Patrick Westfeldt, Jr.
North Boulder Circuit Design
westfeldt_nbcd@xxxxxxxxx
720-406-0887
c 720-272-5822
Other related posts:
