That worked even better. Thanks Andrew. _____ From: Andrew Noonan [mailto:andrew@xxxxxxxxxxx] Sent: Monday, September 20, 2004 1:35 PM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Re: negative text in positive plane A couple of details I missed... 1.) Import and place at x0,y0. This will put the text right where you placed it originally. 2.) Make sure the text has the desired line width before outputting, otherwise it's the default in the artwork control form. Andrew -----Original Message----- From: Andrew Noonan Sent: Monday, September 20, 2004 12:22 PM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Re: negative text in positive plane Patrick, Try creating the text on a new subclass (something unique, that no other entities are on), and create the text in the position you want it. Create and artwork control file to output that text only. Read in the artwork file to the etch layer you want it. It comes in as lines. Edit the shape and void elements, lines only. Delete the lines after filling the shape. Voila. Pic attached as example. Andrew -----Original Message----- From: westfeldt [mailto:westfeldt_nbcd@xxxxxxxxx] Sent: Monday, September 20, 2004 9:23 AM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] negative text in positive plane How do you do negative text in a positive plane, so that all you see are the negative letters? Patrick Westfeldt, Jr. North Boulder Circuit Design westfeldt_nbcd@xxxxxxxxx 720-406-0887 c 720-272-5822