[PCB_FORUM] Re: navigating by coordinate..
- From: "Ooi, Ching Leong" <ching.leong.ooi@xxxxxxxxx>
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Tue, 25 Apr 2006 19:13:03 +0800
List,
Below is some sharing ,may not be new to some of you,, if you wish to
navigate around the PCB using coordinate (like feedback from design
review) ,, put them in the following format,,
(1234 3456)
(2222 3345)
...
(12 88)
save them as plain text file..using notepad / wordpad
Open the text file inside allegro (using allegro own file viewer) ,
File->File viewer. Click on the coordinate bracket..and see, you will be
zoom center to that location. But make sure the zooming extent is big
enough (close up view).
Also make sure you have this option turn off (Setup-User
Preference-Display-no_zoom_to_object) is un-checked.
enjoy.
CL,Ooi
Cad
Other related posts:
- » [PCB_FORUM] Re: navigating by coordinate..
